yeh it comes out the back of the cluster. Its the signal for the abs and stock ps.

Items
 

Hey what exactly is needed for this build like which steering rack did you use a power steering rack or a manual or is it from the s4 or the s5 thanks

either S4 or S5 PS rack is fine. Rack all stays the same.

If you have a manual rack you will have to change it.

Any updates on this? How is the pump holding on?

Anybody else tried it?

Ive been running mine for the past month or so, is great !!, still need to hook up the speedo input, but has been a great addition.

+ with 245's on the front I can turn the wheel again with ease :)

I have a clip on youtube somewhere, just do a search for mantrx7

Are you running yours at all time, or using a switch?

I need to do something about the PS soon. Those 245 (or is it 235? can't remember) are KILLING me :lol:

full time currently, plan to wire up the speed control later, but full time isnt half as bad as I thought it would be. Only at speeds over 160km/h it gets a bit twitchy

Can you share some pics on how/where you have it mounted and the p.s. line hook-ups? cheers

Quick video I did here a while back.
http://www.youtube.com/watch?v=llxTS...layer_embedded

updates?

nothing new still runs fine :)

2 questions.... which mr2 is the pump our of and would this process be much differant for an fd?

from the spyder if you want the reservoir.

FD, would be the same but the feed and return line might be in different locations.

Is that parts by max in the background?

what ?

Sorry the shop
in the pic with the green 240sx

some more info to add to this

P/S into K20 EG Writeup... - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum

Electro Power Steer

also, any word on what fittings to get for the rack itself?

this looks like it has the info:
AusRotary.com • View topic - FC power steering questions?

I think martin converted his FC as well

why not add a switch to turn off the pump? power steering is good for parking but i actually prefer it off when driving.

It doesn't work like that, its different to a manual rack. Go pull your belt off your current powersteering setup and tell me if you like it.....

I should have mentioned im asking for an fd

Sorry not sure. But its very obvious if the lines are put round the wrong way (it shudders back and forth just sitting there)

(ask me how I know :P)

My question was about what fittings to get for an fd rack. Like what size and pitch

i never pulled the belt off my rx7 but i run no belt on my turbo prelude and i love it, even without an electric motor for parking. its a lot harder than a manual rack but the feel of it is much better.