Originally Posted by Javier
I'm in Wiesbaden. And yes I can tune my next question is. Do you have the pfc dataloger or do I need to get mine. Also what gen rx7 and set up please.
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/numbers-not-adding-up-bad-times-shops-power-not-where-should-1005587/ It'll be getting shipped out to me in Germany in a few months and I'll be looking to get it right and retuned when it arrives. Yes I do have datalogit software and cable. |
Let me know if anyone needs help with a rebuild. I just finished my first one and would like to do it again :)
|
im ansbach germany looking for people to meet up with and learn more about rx7's.
|
Hey what's up my fellow rotary heads, I found this thread by doing a google search. Recently blew my motor in my turbocharged RX8 and was looking for someone in Germany that could do a rebuild. I pm'd a few of you from this thread.
I'm a member of rx8club... here's a pic of my broken baby :( http://sphotos-b.xx.fbcdn.net/hphoto...41234290_n.jpg http://sphotos-b.xx.fbcdn.net/hphoto...73272263_n.jpg |
Is that an older pic? I thought that Trueno got sold and sent away?
|
...sold to my friend. Trueno w/ S2000 engine swap.
|
Bump
|
Anybody interested in buying my FD? Gotta sell real quick and cheap!
|
I am in Spangdahlem and i need a Rebuilder for my 13b, it had 70k km on it and the guy took it apart and threw away the apex seals on the first rotor, he couldn't open the back (thank god.)
I am looking for a Heavy Streetport with 3mm Apex seals. I have a 94 R.E. Amemiya, a spare un-registered 92 "parts car" sitting too.. Higgi, You need a clean 92 FD body? i'm sure we could work something out since i hear you are " A Beast" when it comes to engine rebuilds. |
Javier20B from the club here did my engine rebuild on my RX8. I towed my car to his house in Wiesbaden. He is really what I would call a rotor head and did an awesome rebuild on my car, he can pretty much work on a rotary with his eyes closed. Bad news is he's in the states right now doing some training (he's a helicopter pilot in the army), but he should be back in a month or so. So send him a PM and let him know I sent you his way. I'll shoot him an email too. Btw we were going to workout the same exact deal for my rebuild, I was going to buy a FD and he was going to swap the motor into my RX8 and I give him the FD shell ... But the car ended up selling before I could get to it.
Originally Posted by Lucius_Nightbringer
(Post 11473091)
I am in Spangdahlem and i need a Rebuilder for my 13b, it had 70k km on it and the guy took it apart and threw away the apex seals on the first rotor, he couldn't open the back (thank god.)
I am looking for a Heavy Streetport with 3mm Apex seals. I have a 94 R.E. Amemiya, a spare un-registered 92 "parts car" sitting too.. Higgi, You need a clean 92 FD body? i'm sure we could work something out since i hear you are " A Beast" when it comes to engine rebuilds. |
pretty much i will be selling the clean spare shell for $2500, Or to trade for a quality 3mm or Ceramic rebuild. i have one more rex i am trying to get my hands on.
The Blood Red RX-7 from Ramstein was originally mine, and it's now back in my possession lol. I don't know the condition of the motor until i have it running i will need to get a compression tester or have Javier20B check it out. I have a lot of spare parts and some pretty expensive parts as well. i will be noting what i have spare once i have the R.E running solid. |
PM'd you, waiting for your email...
|
I am looking to move to Berlin anyone have room to spare and maybe some work when I get there?
|
Help!
Hey guys. New to the scene. Picked up a 1992 J-Spec FD that was in pieces. Just finished putting the engine back together but getting a bit in over my head. Is there anyone somewhat close to Kaiserslautern that could lend some some knowledge?
would love to get her running in the next 3 months. Thanks! Joe |
Originally Posted by JocoRacing
(Post 12178981)
Hey guys. New to the scene. Picked up a 1992 J-Spec FD that was in pieces. Just finished putting the engine back together but getting a bit in over my head. Is there anyone somewhat close to Kaiserslautern that could lend some some knowledge?
would love to get her running in the next 3 months. Thanks! Joe |
|
All knowledge is here on forums for free :)
If you need some work done, i can offer my services - in case none of the german guys who are closer will help you out :) |
Originally Posted by JocoRacing
(Post 12179091)
I don't speak or read German. I'm learning tho
I know Iwan in Munich rebuilds engines and also one shop in Austria that is good, not sure how close to Austria you are... |
https://cimg8.ibsrv.net/gimg/www.rx7...9eee02d11c.jpgi have orders to Grafenwöhr Germany may 2018 , im shipping my FD there
|
fc 13b s5 rebuild
Originally Posted by hIGGI
(Post 9068023)
I could do it as well
could you rebuild engine and do some remap because after turbo rebuild and change of most vacume hose it started to knock. if you can please share your ph. no. and average price for your service. BR Tomas +370 61806725 |
Originally Posted by McPie
(Post 12220716)
Hi my fc lost compresion... have no idea about demage. would bring you a car from lithuania with one spare engine block were water seals failed...
could you rebuild engine and do some remap because after turbo rebuild and change of most vacume hose it started to knock. if you can please share your ph. no. and average price for your service. BR Tomas +370 61806725 |
Just got to Germany. I'm currently eyeing a FC and I'm wondering if anyone is still out here possibly doing engine work before I decide to pull the trigger.
|
sure, everything is possible
|
Originally Posted by hIGGI
(Post 12360548)
sure, everything is possible
|
With rotary, always expect the worst (engine damaged beyond repairability)
|
All times are GMT -5. The time now is 01:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands