PMC timing?
Thread Starter
Retired RX7 mechanic
Joined: Feb 2001
Posts: 999
Likes: 0
From: Long Island, NY
PMC timing?
What do you guys have your timing set at when stock?
I have a PMC and need to know the stock timing.
Also You guys with PMCs, How the hell do you program this thing?
Anthony
I have a PMC and need to know the stock timing.
Also You guys with PMCs, How the hell do you program this thing?
Anthony
Passenger
Posts: n/a
My timing for stock boost is set at 0 for all rpm points.
To Program, you first of all need to know what you want to do. eg. to make fuel adjustments. First of all, after you turn on the ignition press enter & a screen on the keypad should come up asking which data set you want to get into. Say you want to adjust data set 1, press 1 & then enter. Then the next screen asks what menu you want to get into. For fuel, that's menu 6, so press 6 & enter. Boost at 1psi screen comes up. You don't need to do any adjustments here, so press the button II for max boost screen, max boost at 2200rpm comes up. Continually pressing the II key goes thru the rpm points you can adjust-2200, 4000, 6000, 7800. Press the add or sub keys to add or subtract fuel. To save your changes after adjusting ea. rpm point, press enter then save/tog, screen comes up asking which data set you want to put the changes to. We,re adjusting #1, so press 1. That's it basically, for fuel. To make timing adjustments, you'd have pressed the III key instead of II above.
Hope this helps, I'll answer any more questions you have best as I can.
Chris
To Program, you first of all need to know what you want to do. eg. to make fuel adjustments. First of all, after you turn on the ignition press enter & a screen on the keypad should come up asking which data set you want to get into. Say you want to adjust data set 1, press 1 & then enter. Then the next screen asks what menu you want to get into. For fuel, that's menu 6, so press 6 & enter. Boost at 1psi screen comes up. You don't need to do any adjustments here, so press the button II for max boost screen, max boost at 2200rpm comes up. Continually pressing the II key goes thru the rpm points you can adjust-2200, 4000, 6000, 7800. Press the add or sub keys to add or subtract fuel. To save your changes after adjusting ea. rpm point, press enter then save/tog, screen comes up asking which data set you want to put the changes to. We,re adjusting #1, so press 1. That's it basically, for fuel. To make timing adjustments, you'd have pressed the III key instead of II above.
Hope this helps, I'll answer any more questions you have best as I can.
Chris
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Engine Management Forum
11
Nov 9, 2015 01:15 PM