hahaha. I found a 2.5" led trailer light that looks good. I may use that. Idk, I may do a projector on that side too. idk.
|
|
Legit
|
tires are too small
too much gap |
It's sitting high Russ, I'll get more pictures of it today after work. It's sitting high because I have a s14 wheel with a flat tire on the other side so the car is leaning on the driver's side pretty bad
|
Grabbed some better pictures with both the 18's in the rear.
https://scontent-b-dfw.xx.fbcdn.net/...13245592_n.jpg https://scontent-b-dfw.xx.fbcdn.net/...98724403_n.jpg https://scontent-b-dfw.xx.fbcdn.net/...88718407_n.jpg https://scontent-b-dfw.xx.fbcdn.net/...44774447_n.jpg https://scontent-a-dfw.xx.fbcdn.net/...16193190_n.jpg https://scontent-a-dfw.xx.fbcdn.net/...75243567_n.jpg |
Steeeeeezzz man...steeeez...
|
thats better
but i still think there isnt enough tire |
Yeah, I'm either going to take a little camber out to get the tire flush, run a 30mm spacer instead, or go even lower lol. one of those three will happen.
|
Those wheels are dope! Got any full side shots?
I'm liking the kaleidoscope black paint much more than the grey too! |
Originally Posted by Schmitty
(Post 11634056)
Those wheels are dope! Got any full side shots?
I'm liking the kaleidoscope black paint much more than the grey too! |
fuck my face this car is so good looking, those bazreia's melt my life
nice work duder |
less talk, more this
remember when it could do this? |
Originally Posted by RussTII
(Post 11635925)
no burnouts in the pits lololol.. I actually picked up a couple engine stands tonight russ, the motor should be built this weekend! just need a fuel rail, head lights, and a tune after that! |
one step closer to burnouts
https://scontent-a-iad.xx.fbcdn.net/...56533144_n.jpg https://scontent-a-iad.xx.fbcdn.net/...05832149_n.jpg https://scontent-b-iad.xx.fbcdn.net/...56383906_n.jpg Just have to clay the pistons now to check for clearance, then put all the engine accessories back on it. |
im waiting for pictures of this thing as low as it will go.
|
Originally Posted by joshuaput
(Post 11638985)
im waiting for pictures of this thing as low as it will go.
turns out my valves and pistons are playing patty cake.. time to take it back to the machine shop and get the pistons fly cut. https://scontent-b-iad.xx.fbcdn.net/...84580054_n.jpg |
https://scontent-b-dfw.xx.fbcdn.net/...88718407_n.jpg
http://i45.photobucket.com/albums/f6...ps8eb6c8a3.jpg here is a 10 second mspaintchop. please run it so the skirts are on the ground. thanks. edit: this also makes me want an fd. and another for good measure https://scontent-b-dfw.xx.fbcdn.net/...98724403_n.jpg http://i45.photobucket.com/albums/f6...ps994b8a50.jpg |
Yes do this
|
I wish I could go that low. My car squats way too hard to be that low. I'd be ripping off my back bumper every time I did a pull. I need stiffer coilovers first
|
Beefier springs, but I think if you fall somewhere in between those to pics with ride height it will still look Rad and give you still some suspension travel.
|
fd's don't look good tucking IMHO. I think it looks sick the very first pic where your tires are showing. Plus you won't scratch the hell out of those pretty wheels. First pic is perfect drift fitement if that's what your worried about.
|
Originally Posted by mannykiller
(Post 11639851)
everything looks good tucking*
|
Originally Posted by Premiumriceonly
(Post 11639863)
Originally Posted by mannykiller
(Post 11639851)
everything looks good sliding
|
Not worried about fitment from wheel to over fender, worried about smashing my bumper and side skirts off when the car squats. Once I get stiffer spring, I'll be fine
|
All times are GMT -5. The time now is 06:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands