BLAH I need knuckles super bad
|
Originally Posted by Derek King
(Post 11494455)
Just now saw this and noticed I had a typo. I have x4 2200cc Injectors.
I use Klotz Super TechniPlate oil. Just had to buy a new case this week. Klotz is based out of Fort Wayne so its pretty convenient for me plus im pretty sure its the best stuff to mix with E85. One ounce per gallon is what I mix at. |
I saw you post up some numbers on Hipstergram. Was that on E85 already or what?
|
https://sphotos-a.xx.fbcdn.net/hphot...67045964_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.n...07735070_n.jpg https://fbcdn-sphotos-a-a.akamaihd.n...48843895_n.jpg https://fbcdn-sphotos-h-a.akamaihd.n...58658936_n.jpg stoked to put down 467whp! definitely could have pulled more out of it but kept the timing fairly conservative... |
Originally Posted by Derek King
(Post 11494455)
Just now saw this and noticed I had a typo. I have x4 2200cc Injectors.
I use Klotz Super TechniPlate oil. Just had to buy a new case this week. Klotz is based out of Fort Wayne so its pretty convenient for me plus im pretty sure its the best stuff to mix with E85. One ounce per gallon is what I mix at.
Originally Posted by Derek King
(Post 11494513)
I saw you post up some numbers on Hipstergram. Was that on E85 already or what?
|
Originally Posted by J.T.P.
(Post 11494519)
no, just went with vp110 for now... it's what I know and I didn't want to try anything new just yet...
|
Originally Posted by Derek King
(Post 11494536)
Right on. Im getting on the dyno tomorrow to go over my high boost tune and maybe up it a few psi. Sitting at 450 at 16.5psi. Probably gonna see what we can do around 18psi. Numbers should probably be very similar to yours. EXCITE.
I love how there's a bunch of good looking FC's popping up... dk's car is looking sharp, buckey's should be tuned soon, lex's is in the works... Rad Dan is gonna be back soon... just need to get Dan Chilton to the west coast and keep this movement going.. haha |
Cant wait for rad dan to be back in the mix
That dude wins at everything. Such a funny guy |
Originally Posted by J.T.P.
(Post 11495604)
soooo.... what did it make?
I love how there's a bunch of good looking FC's popping up... dk's car is looking sharp, buckey's should be tuned soon, lex's is in the works... Rad Dan is gonna be back soon... just need to get Dan Chilton to the west coast and keep this movement going.. haha Was just at Dan's shop. He'll be sliding this Sunday at our event. His car's looking good as usual. Joked around with him at how many Hot Line stickers he has around the shop/on his car. |
That RE torque band, liking this!
|
|
1 Attachment(s)
Originally Posted by J.T.P.
(Post 11496511)
|
Doooood... Those wheels.
|
Congrats on the sexy numbers. What turbo are you running, how many PSI, and whats the sizing on the hot/cold side? im really digging this build and am super nosey because i wanna get some ideas what im gonna be pushing. Thanks man
|
Originally Posted by OC DEBO
(Post 11497920)
Congrats on the sexy numbers. What turbo are you running, how many PSI, and whats the sizing on the hot/cold side? im really digging this build and am super nosey because i wanna get some ideas what im gonna be pushing. Thanks man
S300 – 177274 0.55 A/R CC 3.140” (80mm) CW diameter 2.305” (58.547mm) CW inducer 3.000” (76mm) S&W diameter 2.659” (67.539mm) S&W exducer 0.83 A/R TH hit 467whp at around 1.3-1.4 bar |
I love drift cars that can run 10s...because im a hillbilly
|
Originally Posted by Derek King
(Post 11498904)
I love drift cars that can run 10s...because im a hillbilly
|
When are you going to run E85? I would like to see the dyno comparison and HP difference
|
Now paint it hotline green already dude !
|
Originally Posted by J.T.P.
(Post 11498769)
I'm running a Borg Warner turbo.. here's the specs:
S300 – 177274 0.55 A/R CC 3.140” (80mm) CW diameter 2.305” (58.547mm) CW inducer 3.000” (76mm) S&W diameter 2.659” (67.539mm) S&W exducer 0.83 A/R TH hit 467whp at around 1.3-1.4 bar |
got the meshies mounted up...
https://sphotos-b-sjc.xx.fbcdn.net/h...15096206_n.jpg https://sphotos-b-sjc.xx.fbcdn.net/h...22546266_n.jpg and modded the lca for more clearance... https://sphotos-b-sjc.xx.fbcdn.net/h...48027761_n.jpg https://fbcdn-sphotos-d-a.akamaihd.n...67765460_n.jpg https://sphotos-a-sjc.xx.fbcdn.net/h...15745449_n.jpg https://sphotos-a-sjc.xx.fbcdn.net/h...23779289_n.jpg |
Yes
|
damn that lca is nuts
|
Very nice
|
Meshies are on point. 18's?
|
Originally Posted by driftfcbuckey
(Post 11554364)
I remember you swearing that extended lca's felt like shit and here you are... Lol
Originally Posted by cloudx189
(Post 11554375)
I don't think he mentioned anything about extending it...
Originally Posted by 10thslydur
(Post 11554395)
Meshies are on point. 18's?
|
Are those DG5's? :drool1:
Getting ready for ASB reverse entry comp :nod: Always an inspiration. |
O course they are dg's
|
Originally Posted by J.T.P.
(Post 11554592)
no mention but they are slightly extended. however I'm retaining the stock ball joint piece for ease of replacement if necessary... unlike some other kits out there.
|
Where'd you pick up the SSR's? I remember a guy running those in 9/10's on his blue FC in the bay area
|
traded my equip 01's for them from a guy in ATL
|
Im looking to extend my flca's also. Did you do any kind of reinforcement? Doesn't seem like you can go with the box method with these and they seem somewhat weak if you modify them.
|
Originally Posted by driftfcbuckey
(Post 11555751)
My red car made 400 on 12psi son. Aint no v8 in there ;p
|
Well JTP i think your an inspiration for me to build my car. Here it is. Im 18 and i wanna build my car with aspects from yours. It may look like your original car. It will be hard with the money aspect but i will try.Good luck with your build its awesome http://images.craigslist.org/00v0v_3...xg_600x450.jpg
|
1 Attachment(s)
|
Part Shop Max rear suspension parts going in the Rebound today..
https://scontent-b-lax.xx.fbcdn.net/...09481958_n.jpg Old setup is good but glad to be working with the PSM guys! https://scontent-b-lax.xx.fbcdn.net/...54909474_n.jpg Also got this catch can from the guys at Radium Engineering.. looks good and should do the job! https://scontent-b-lax.xx.fbcdn.net/...91568006_n.jpg |
dude i thought Dave's old rear end was legit??? new parts are always good
|
I am actually very excited to see your thoughts and reviews on the PSM rear end setup. I was planning on picking up everything for the rear and your front end kit.
let us know how you like it/hate it !!! |
Originally Posted by Zenki FC3S
(Post 11581556)
dude i thought Dave's old rear end was legit??? new parts are always good
Originally Posted by archaphil
(Post 11581963)
I am actually very excited to see your thoughts and reviews on the PSM rear end setup. I was planning on picking up everything for the rear and your front end kit.
let us know how you like it/hate it !!! I plan on lightening the trailing arms like the previous setup as well therefore it's going to be taking a little more time than a typical install... I'm going to be keeping the old setup complete as a full spare setup.. or for a future project maybe.. |
I saw the video of that FC with the 1jz it was nice seeing you in a FC did he have that hole rear set up?? Is that what made you want to get psm parts for your FC??
|
yeah it was weird hearing a different engine in the car but it drove really nice... that setup only had around 230whp or so... so i'm looking forward to feeling it out with 460whp..
|
what tire size do you have or plan on running on the 12.5 J's?? Im getting ready to get some 285's or so for mine and would like to see what it looks like first.
whats the offset as well, and your rear fenders are 60mm??? |
Originally Posted by Zenki FC3S
(Post 11582344)
what tire size do you have or plan on running on the 12.5 J's?? Im getting ready to get some 285's or so for mine and would like to see what it looks like first.
whats the offset as well, and your rear fenders are 60mm??? offset is +5 my fenders fit like true 50mm but can be flexed to about 70mm |
you still make knuckles for rx8's jtp? hit me up with tie rods and knuckle help if you got time.
|
any chance you could take a picture from under the car looking up at the front suspension? with wheels straight and full lock?
|
What side skirts are you running on this car.
|
Originally Posted by l3eltinck
(Post 11584634)
you still make knuckles for rx8's jtp? hit me up with tie rods and knuckle help if you got time.
Originally Posted by BALLZAK8
(Post 11597385)
What side skirts are you running on this car.
|
https://www.dropbox.com/s/tn8ayyhddgi2v3n/JTPv2.mov
little clip from Will Roegge from this past weekend! |
Originally Posted by J.T.P.
(Post 11604346)
https://www.dropbox.com/s/tn8ayyhddgi2v3n/JTPv2.mov
little clip from Will Roegge from this past weekend! |
Originally Posted by Premiumriceonly
(Post 11604502)
the only rotary car out there that i saw at least. holdin it down
|
All times are GMT -5. The time now is 06:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands