suuhweet
|
Maybe a stupid question ... Why are you keeping your ABS ?
I really like the flashy rims on black dress :) |
Originally Posted by Vell
(Post 10189791)
Maybe a stupid question ... Why are you keeping your ABS ?
I really like the flashy rims on black dress :) |
Originally Posted by ballinnmiami240sx
(Post 10189824)
Not keeping it actually. I just havent had time to take it out. NExt on the list is the BN sports kit.
|
Raceonusa.com
Its gonna exploded on the track, so no real body kit for me.....lol. |
Hey, can you tell us a bit more about this story of unburnt fuel = detonation ?
I think it's happened to my engine but I can't explain this, it's all about what I felt when the engine lost an apex seal without any load. |
The tone of the engine changed. It sounded like it had cams in it. The compression fell to about 60psi. I still ran 2 more events with the engine the way it was. I felt no real power loss, but the idle suffered alot.
|
So the just rebuilt engine has a tone of smoke pouring out the exhaust. I tried fixing the port work and i guess i make it worse. Now i have to order another gasket kit and rebuild this motor for the 4th time. I also have another set of housing in my garage that Im debating whether to have them lapped or just throw them back in.
|
wow that is crazy... 4th time already. Measure them if they are in spec use them
|
:shooter:
Originally Posted by vosko
(Post 10235514)
wow that is crazy... 4th time already. Measure them if they are in spec use them
https://farm3.static.flickr.com/2784...bd90a0e6_z.jpg You can see how the port would be cutting into the oil control ring area.:icon_tdow. I bought the pineapple racing street port template and it was abvious that the previous guy who built my engine ported the inside part of the port. https://farm5.static.flickr.com/4015...ed14e437_b.jpg |
LAME!!, so whats the plan now ??
|
Yeah man... you can't really come back once the ports are fucked up... If you already have the pineapple templates, then you should be good... general rule for turbo application porting, is to clean out the casting, and extend a few degrees of port timing, but most of your power is going to come from your turbo setup and tuning...
The stock ports are there for a reason... but there definitely is room for gains with a little rotary grinding time. Def. don't want to cut in on the port towards the center of the iron(as you have found) as there's not much room before the OCR's become an issue... Good luck dude... |
Originally Posted by Battle Cat
(Post 10235572)
LAME!!, so whats the plan now ??
Originally Posted by davedge
(Post 10235761)
Yeah man... you can't really come back once the ports are fucked up... If you already have the pineapple templates, then you should be good... general rule for turbo application porting, is to clean out the casting, and extend a few degrees of port timing, but most of your power is going to come from your turbo setup and tuning...
The stock ports are there for a reason... but there definitely is room for gains with a little rotary grinding time. Def. don't want to cut in on the port towards the center of the iron(as you have found) as there's not much room before the OCR's become an issue... Good luck dude... -Danny- |
you will be a rebuilding pro soon... unfortunately
|
WIRE TUCK FTW and deff remove the abs :)
|
Originally Posted by vosko
(Post 10236369)
you will be a rebuilding pro soon... unfortunately
|
Update:
I let the car run for about an hour RPM's ranging from 800-2000. THe smoke has seemed to go away. I still need a tune to be able to take it out on the road. |
any updates
|
do you have stock irons ?? just put them in ? don't touch them... then you cannot have any problems!
|
yup...I just ported the front and rear iron. gonna do the center tomorrow and done. Should be all back together by thursday and hopefully make 100 drifters at summit point saturday. I used the pineapple racing template and did a mild port. I didnt get too crazy. Im also thinking about scrapping the oil mod and going back to stock. I did the pineapple oil mod. What do you all sudgest?
|
Not the best quality video but you get the idea. It runs and sounds super loud. It seems the new housing and my new port job did the trick. It has only been running for about 4 minutes in these video. Its burning all the oil i packed it with.
[youtube]S4ObpQlWv8k[/youtube] [youtube]j_chUpDhFOQ[/youtube] |
So its been running for about 2 weeks now and the smoke is still there. minimal but it is still there. Looks like im running about 75psi of oil pressure when im reving it up. Could that send too much pressure to the turbo and letting it get passed the turbo seals. Im running a -4 inlet line and a -10 return. The turbo is a brand new borg warner s362 with no restrictor.
|
i would probably try a restrictor before pulling the motor apart yet again.. work your way gradually smaller with the oil jet size until it disappears and leave it be.
this is why oil pressure upgrades are a bad idea, i hate that these shitball shops try to upsell them to people without telling them what they need to do to bypass the other issues associated with raising oil pressure in turbo applications. |
thats what I just did thru atpturbo. I ordered a .035 restrictor and a better return line.
|
All times are GMT -5. The time now is 12:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands