My Fc3s S5 Build thread!
Hey guys, So The racing Season of 2012 is starting soon so i have already started working on my 1990 Rx7 Base model with full turboII swap!!! so ill talk about the car and whats going this season.
Cars specs: Engine/Tranny: -s5 turbo II -S4 Turbo Tranny -Exedy Twin disc clutch kit with fly wheel and release bearing -S5 Turbo Diff -Blitz Bov -HKS internal waste gate valve 12psi -Cold air intake plenum -2 sets of plugs, 4 Cold mazdatrix racing plugs, and OEM plugs -HKS Down pipe -Full cork sport straight pipe (No cat) Brakes/Suspension/Bushing: -Fd front calipers -Rear turbo 2 calipers 5 bolt all around -Tein HR 12k 14k n/Adj damping -Turbo II sway bars -Hawk HP+ pads -OEM rotors -CP 4 point strut bar -Rear strut bar Interior/Electronics: -Apexi SAFC -AEM Wide Band -ProSport Premium Series + warning lights -Water Temp -Oil Temp -Boost -HKS FCD -Bride Zetta 3 FRP bucket non adj -Sabelt harness -Rear Bins full black interior Rims/tires: -1 Set of Advan Oni 17x9 all around deep dish Flush with chassis (track rims) -1 set of 18x8 and 18x9 Fast wheels TE37 Rep's (summer driving rims) -235/40/17 all around R888's -Hoosier R6 245 all around coming soon:D -245/35/18 Front, 265/35/18 Back Kumho Ecsta summers So Thats my car so far:), will upload pictures when i get home lol im at work bored... But yea i will be Attending http://www.sigmatimeattack.com/ this year again for all the 4 track days, Cant wait will be fun and a great learning experiences!:D Stay tuned guys and youll get the whole build on my FC for this season and seasons to come:) Best Regards Pat (13bBackFire) Or follow my Facebook group i made just search P.B.R (patrick Burdon Racing) youll see a red FC with silver 3 spokes:) thats me:D!!! enjoy and hope you guys can support me in my build:) <3 Rx7's for LIFE:D!!!!!!!! |
nice setup, looks like you are set for this coming season.
|
Looking forward to this year. Pretty much done myself other then trying to figure out the install of my PRO2000 seat.
Post pics of your progress:) |
Originally Posted by RX7(613)
(Post 10982533)
nice setup, looks like you are set for this coming season.
hopefully nice brake set up!!:) Dial in my alignment and see how she does:D! but thank you:D!!! Thanks Ian awww good to hear about the seat:D!, im trying to buy a nice Seat to looking at the bride maxis 3, Sparco Circuit plus, and some others:D! and will do making an account on photo Bucket:D! to post some pics Also guys join my group the pics get uploaded first to my Facebook group:D! http://www.facebook.com/groups/PatrickBurdonRacing/ |
Here is my album i just made quickly of the pics i have from tracking my fc last year, and some others will post a few more pics on what im working on and parts i got in the mail:D!!!!
http://s1066.photobucket.com/albums/...0Build%202012/ |
Here is a vid of me driving Bosomode's Civic for the 2 track days posting good lap times! Mosport DDT Counter clock wise 2kinks 1:09:02 was my fastest lap
http://www.youtube.com/watch?v=6E4W1QnLexY |
quite a lengthy list there pat. Itll be nice to see the FC out again.
|
Great video. car looks like it hooks up pretty well.
Just one comment and this applies to many of you track day guys, the way that the shoulder harnesses are mounted is really wrong and very dangerous. They angle downwards at a pretty sharp angle behind the drivers shoulders. I totally understand why they are mounted this way as its the easiest way to mount them without a cage, but you just can't do this. If you had an accident bad enough where you would need the harnesses to actually work, the angle they are on would compress the spine very severely and cause structural spine damage that could result in mobility issues. Go to the CASC or SCCA website and look in the GCR's under harnesses and cages. you will see that there is a range of allowable angles for the shoulder harness mounting points, basically close to 90 degrees off the top of the shoulder. In a car without a cage, get a harness bar to go across the car from piller to piller and mount the harness to that. Just some advice as someday I would hate to read about one of you guys getting hurt because of something simple like this. Eric |
Thanks ken:)! Ohh are you comig out to all 4 sigma track days?:) with that sexy beast!:D!! And youll deff see my fc out this year!:)
Hey eric yea we knew the cons on the harness install wasnt smart but ehh.. This year bosomode civic got a 4 point bolt in from auto power! So im lending them my 5 point sparco 3 inch harness for the time beaing untill i can get a cage!:)! Rigt now im rocking stock seatbelt hahaha so i guess thts fine!:) thanks eric for the lecture it opens people eyes on stuff like this:)! Best regards pat:) |
hey guys i notices most of you are from the GTA do you guys no of any meets around??
|
I'm sure we meet before but dam are you a short guy? How can you have so much room above your head? I can't fit at all. Maybe cause its a civic! Mind you I have a sunroof above my head so this causes less room.
Matts rotory crazy, Not many meets anymore. Mostly track days for me and DGRR. I think a few people meet up a bit in parking lots but I have not went to one of those in a while... |
No i dont really go to meets only track days!:)!!
Haha ian im 6foot lol the civic seat is verry verry low and its a hatch haha so alot of head room!:)!! When i sit in my fc i have 4 to 5 inchs of head room:/! |
no probs was just kickin some tires wouldnt mind a track day anyway and ya there is little head room in my fc with a hat on my hat hits the roof :p
|
Matt! You shoukd come out to sigma very cheap to have fun:)!! Yea thank god i dont drive an fd LOOL no head room:/!
|
just tell me when and where if i still have my car by then ill for sure go and ya there is no room in fd's almost bought one not too long ago :(
|
visit http://www.sigmatimeattack.com/ ill be at all 4 events also, for quicker update go to facebook and join my group P.R.B Patrick Burdon Racing:)
Picture, Parts, Progress update:D!!!!!, http://i1066.photobucket.com/albums/...e/6d873da4.jpg http://i1066.photobucket.com/albums/...e/043ded58.jpg http://i1066.photobucket.com/albums/...e/48757d46.jpg http://i1066.photobucket.com/albums/...e/a39bbae0.jpg Thats her before winter storage:D!!! NOICE an Cleaan!:D |
Update:D
Pictures, Parts, Progress Update:D!!!!!
2011 Sigma racing time attack Track day:D! http://i1066.photobucket.com/albums/...1_697618_o.jpg http://i1066.photobucket.com/albums/...04-640x427.jpg http://i1066.photobucket.com/albums/...03-640x427.jpg http://i1066.photobucket.com/albums/...80-640x427.jpg http://i1066.photobucket.com/albums/...79-640x427.jpg This bottom one Alan Poon (Forum Name MIBagentQ) is in the back with his monster FD:D http://i1066.photobucket.com/albums/...58-640x427.jpg |
update:)
Pictures, Parts, Progress Update!!!!!
What i am Making for my centre Console and my few parts i got in the mail:D!!! So what did i get:D? -Yellow TRS tow straps (2) -Solid aluminium Engine and tranny mounts -Fibre glass kit for my Centre console:D My girl friend (Sara) got me: -KENS AMAZING WHITE FD ON THE COVER OF MODIFIED :D!!! was looking every where for this... -The turtle's for valentines day:D! http://i1066.photobucket.com/albums/...e/0201d88d.jpg Here is my centre console i am making for my gauge holder (this is just a mold for the FRP) Front cover i still havnt decided on how to arrange my gauges so we will see ill keep you guys posted! http://i1066.photobucket.com/albums/...e/0adceda2.jpg http://i1066.photobucket.com/albums/...e/2b6b31e8.jpg http://i1066.photobucket.com/albums/...e/a356ab13.jpg http://i1066.photobucket.com/albums/...e/252fc300.jpg http://i1066.photobucket.com/albums/...e/339d7c99.jpg The reason for this is because i need to put my gauges some where they wont bother me like the dash i need to see the track not gauges thats why i am making this and spent more $ for warning lights and better gauges to have warnings and peaks:) Stay tuned |
quick and small update:)
Flame Video at SRTA event 1 (cayuga) Here are a alot of picture of the car at cayuga!!!! http://s571.photobucket.com/albums/ss151/JDMmz309/Fc3s/ < alot more pics inside this folder :D Sneak peaks:) http://i571.photobucket.com/albums/s...02639378_n.jpg http://i571.photobucket.com/albums/s...36924273_o.jpg http://i571.photobucket.com/albums/s...8464492_o1.jpg http://i571.photobucket.com/albums/s...19586709_o.jpg |
Nice! Hope that my suspension arrives soon! Next time out we should time it that I can follow you with the Gopro!
|
just curious...what times do you run at cayuga?
|
how did the center gauge panel work out for ya?
|
Ian: haha i hope so to!! But im not tracking this sigma day cant afford a few things!:(!...... But will be their at ddt!:)
Logitikes: it was my first time out at cayuga and i was doing a consistant 1:24:xx Misterstyx69: it only works good if you have in line vision warning lights with out the warning lights not such a good plan on putting gauges their!!:) |
Update us on your work... i just put up my build thread so you can see what i have now and the work im doing
|
will do lucas just trying to get my stuff together because of work and other crap.. but will be updated soon:)
Stay tuned Rx7 Club!:) |
I have a red S5 project so your thread will keep me driven to make progress too. =P
Good stuff so far. I look forward to the next update |
I saw this car at a car show at Woodbine Toyota over the summer! I absolutely loved it and couldn't stop coming by to take some pictures lol!
|
RotaryRocket8 - Thanks man:)!, glad to inspire people on their own builds:)!!!! will keep you guys posted:)!
kYLE_RX-7 - Yea was their haha :p thanks buddy glad someone liked it frig lol not alot of people went to go look at her:(.. they glanced and saw an old red car and left... Best regards Pat |
nice build, clean!
|
Thank you FT-13B
|
Update:)
9 Attachment(s)
Small Picture Update From The 2012 Track Season
Hey guys!! sorry for the long wait on the update's iv been really busy the past few long months!!! Here are some pictures of the FC from SigmaTimeAttack.:nod: New parts that where put on the FC: -Neo Motorsports Big Brake Kit 6Pot Front 4pot Rear, 330mm front and back rotors. with the silver pads! but will be going for the Neo Gold pads for the next tracking days!!. -DuraFlex Rear wide body Temp install for one track day!! haha :p will be properly done!!! -6 Year old R888 tires... lol 235/40/17 -My own Tune for the past 9 months and works amazing!! -Neo-Motorsport Shift knob, and Lugnuts -APR extended studs -OMP 3" deep dish steering wheel (gift from the gf) :D!!!! Attachment 686501 Attachment 686502 Attachment 686503 http://i571.photobucket.com/albums/s...ps7c08d5ce.jpg Attachment 686504 Attachment 686505 Attachment 686506 Attachment 686507 Attachment 686508 Attachment 686509 Thanks to AMF AMF | Automotive Lifestyle Magazine – AutoMotoFoto.net For taking awesome pics!! Also thanks to my wonderful Girl Friend for snapping shots, and supporting me the whole time <3. |
Update:)
3 Attachment(s)
More for the update!!
http://i571.photobucket.com/albums/s...ps6fe97c83.jpg Attachment 686498 Attachment 686499 Attachment 686500 http://i571.photobucket.com/albums/s...ps5d01b04f.jpg Stay tuned for more:D!!!! Thanks to all my sponsors Helping and supporting me in my passion! www.bosomode.ca http://www.neo-motorsport.com/ http://www.automotofoto.net/ http://www.t-shock.ca/ Best regards Pat |
Whats happening in that last picture? prep for over fenders?
|
haha yeep your right lucas:),
Sorry for the late reply just got back from my vacation!!!:) time to start wrenching on this monster:D!!! |
Small Update!:)
2 Attachment(s)
My carbon fibre bumper has came this morning:D!!!! Will take a few shots today on car:). and also still waiting over 2 weeks for my mazdatrix order GAH....
Attachment 685546 Attachment 685547 |
following
|
who makes the bumper? looks like a gp sports, but in cf, i wasnt aware.
|
Awesome thanks scrapp!:)
Mr.cool its a carbon creations gp style carbon fibre bumper!:) |
3 Attachment(s)
Small update!!
iv been doing a small MOCK-UP on how i want to install my Brake ducting. (the zip ties are TEMP dont hate) need to play with the angle alittle more O,o... and got my small order from mazdatrix. intake gaskets, turbo gaskets, and oil cooler fittings -10NA style Attachment 685502 Attachment 685503 Attachment 685504 Best regards Pat:) |
Small Update!!
6 Attachment(s)
Hey guys here is a small update, whats going on with the time attack FC build!!
The whole interior is getting gutted.. Car is getting sent out for cage hopefully soon so i'm just prepping it. Also i just picked up a Mega Squirt Ms-2 with V3.57 bored and Firmware 2.1.0 and a fuse block so cant wait to hook her up:) here are some pics:) Attachment 681757 Attachment 681758 Attachment 681759 Attachment 681760 Attachment 681761 Attachment 681762 Thanks Guys will keep you updated!!:) Best regards Patrick B. :lol: |
RisingRPM Sponsor:)
7 Attachment(s)
Hey Rx7 Club,
I would like to proudly say that Eric from RisingRPM, has given me a full blown sponsorship for the upcoming years of racing and working on my build. We have spoken back and forth about RisingRPM's products and what the company has to offer, the functionality and quality of the products. Eric has seen my build thread and my racing history so he shot me an email regarding a full sponsorship from Him self and as-well as RisingRPM of course. I am very thankful for this opportunity from RisingRPM and hopefully everything goes as best as it can in the near future, i really hope i can work with him more to give ideas and feedback to make the products better and have more product ideas for the future. Eric is a great person to talk to very loyal and humble, He responds to emails very fast and gives you a lot of feedback and knowledge about anything you ask him. Eric is a very kind person and very professional in his emails and great in customer service :nod:... Now i bet you guys cant wait till i talk about the product in detail :blush:. Okay so first i would like to say THE PACKAGING IS MORE THEN AMAZING. Why do i say that?.. well because its very simple, clean, very well packed. the boxing has this thick grey foam between the product so it dose not get scratched, bent, or damaged. Comes with nuts and bolts that are also packaged in small plastic container with foam in it as well. When i first saw that i was like WOW:crzyeye: the first impression that came into my mind was this must be a very good product just because the packaging is over done. Another thing that came into my mind instantly was "wow Eric from RisingRPM must really be confident in the product he makes and designs in order to over package a simple block off plate". Every product comes with a paper saying what it is, how many nuts and bolts come with this product and so forth also signed by Eric him self. So once again id like to say that RisingRPM has one of the best packaging i have every seen before. What comes in the Box Attachment 677077 Now i would love to talk about the product. So once i took all of the RisingRPM products out of its great packaging, i started observing the quality and craftsmanship. Every product i looked at and test fitted was perfect fit no questions asked i bet every product Eric from RisingRPM designs and creates he analyzes it in every spectrum to get the best quality you can get/make. The anodize looks very strong and has a good high quality dye IMO, i already installed my block off plates and took them off to see if their are going to be any heavy scratches or indents but nope everything still looks new. The CNC machining looks great and is pin point accurate and so is Erics CAD drawings/designs. The One thing i cant say AT THE MOMENT is how the product is under engine working conditions Due to my Full race car build so once i get to that point i will let everyone know how the product performs and with stands racing conditions. Remember guys if it can with stand hard serious racing conditions it will with stand streets for sure:nod:!. but at the moment i am very pleased to say that everything i got from RisingRPM is GREAT!!!! as i am seeing in person at the high quality products i bet that their will not be a problem with them in engine working conditions. Thanks again guys for going through my thread and my updates and i hope you have enjoyed this update as much as i did!!! I will post pictures up From what RisingRPM has given me, please stay tuned for the rest of this review and my build. Thank you again RisingRPM for this great sponsorship, i can say that you will not be let down in any way or form ;). Best Regards P.Burdon For More please visit Rising RPM - Home Oil Block: Attachment 677078 Fuel Rail: Attachment 677079 Fuel Rail: Attachment 677080 Block Off Plates: Attachment 677081 Throttle Body Inlet Duct: Attachment 677082 OMP Block Off Bolts: Attachment 677083 |
RisingRPM Sponsor:)
5 Attachment(s)
More Pictures From The RisingRPM Sponsorship Products:nod:
IAC: Attachment 677072 S5 OMP Delete Kit: Attachment 677073 OMP Block Off Close up: Attachment 677074 My Package :D: Attachment 677075 My Package :D: Attachment 677076 Thank you RisingRPM and Rx7Club. Best Regards P.Burdon |
..Damn..
I got all(well most) of that Rpm stuff!..In blue.. I feel unwanted! I did have a Sponsor..(Hello I am Styx and I am an Rx7 Junkie...HI STYX!!!) |
Nice Parts I curse the day I sold my track car. Now I have nothing to drive. Well unless I drive my 10th AE...
|
Thanks guys!!:), haha ian man i told you not to sell that white fc with all the goodies!:)
|
11 Attachment(s)
Hey guys, sorry for not updating for some time now, been busy with the build!:), alright so whats new? Iv been restoring the fc, im bringing the whole chassis down to bare metal fixing the rust, removing the 23 year old silicon and stitch welding the whole chassis to get the chassis stiffness to par or even grater to what is was from 1990, also i will be getting a full weld in cage some time this summer/fall!!,
The motor got some love treatment from me over the winter!:)!, waiting for my turblown twin scroll manifold, atm.. Ported my whole intake manifold to motor intake port, gilmer pulley kit, mazda trix oil cooler fittings waiting for my oil pan stud kit. Rising rpm products are on(the fram oil filter is their to close the hole i use honda filters!) I was bored so i went to get test fit my front wide body, its not bolted in i just bungied it haha :p but their is a problem i measured the front width of the car and the garage door and the car is 3.25" wider then the door... Haha Here are the pics of whats going on !:) |
Awesome build. Can't wait to see it next year. So if you finish it in the garage you cannot drive it out LOL?
|
Originally Posted by IAN
(Post 11512715)
Awesome build. Can't wait to see it next year. So if you finish it in the garage you cannot drive it out LOL?
|
Man, what a build. I hope to get started on my project this fall when I get back from my trip.
|
Originally Posted by DaoNhatHai
(Post 11519275)
Man, what a build. I hope to get started on my project this fall when I get back from my trip.
|
All times are GMT -5. The time now is 05:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands