Blew my engine this morning
1 Attachment(s)
Hey guys, just blew my engine this morning with my son on the way home from meeting with the church. I was in second gear WOT and boom/black puff of smoke. After this I barely had enough power to drive the car home. The engine would shake the car under acceleration, and the acceleration was very slow and unable to build any boost. Got home, let her cool down, and started the tear down. The turbos have oil sitting in them, and the upper intake manifold had a lot of oil pooled in there. I had a silencer in my exhaust so I was able to catch pieces. The car is a 93 Touring. Here's a photo of the pieces I caught. The one piece looks like a part of an apex seal. The engine was old and needed a rebuild anyways, to bad it didn't wait until this coming fall.
|
That sucks but now you can always rebuild it and make it more fun :)
|
Originally Posted by Double_J
(Post 11047852)
That sucks but now you can always rebuild it and make it more fun :)
|
Originally Posted by twilapede
(Post 11047845)
The engine was old and needed a rebuild anyways
|
Sounds like the turbo's blew imo. I'd do a simple compression test before I yanked it out just to double check. If the engine did blow, it sounds like it took out the turbo's with it though.
thewird |
Originally Posted by thewird
(Post 11048205)
Sounds like the turbo's blew imo. I'd do a simple compression test before I yanked it out just to double check. If the engine did blow, it sounds like it took out the turbo's with it though.
thewird |
what does WOT mean???:scratch:
|
Originally Posted by sctRota
(Post 11048720)
what does WOT mean???:scratch:
|
Any if you want to sell it as a rolling chassis let us know!
|
He just said he will plan to rebuild or build a 20b :)
|
WOT= Full Blast
|
Originally Posted by sctRota
(Post 11049556)
He just said he will plan to rebuild or build a 20b :)
|
Originally Posted by rex388
(Post 11050151)
ya but it doesn't hurt to try right lol.
Anything is for sale for the right price:) lol. But I don't plan on getting rid of my car. I might get my turbos off tonight depending on if i have time and I'll add some photos of their condition. |
Originally Posted by FC3Sdrift
(Post 11048368)
you can't spit metal bits through the turbo and expect it to be okay.... I blew mine a couple weeks ago looking in at the turbine wheel the blades looked okay, once i took off the compressor housing there was about 5mm missing off the blades
|
Had almost the exact same thing happen to me when I was driving home year or so back, needed full rebuild and new turbo as well. Good luck man !
|
Its been a while. Finally got back to work on my car. Being in the military with a pregnant wife can use a lot of your time, but its all good. I pulled the engine, yanked the turbos, and ...... the rear rotor is blown!!! There was a couple missing apex seals from looking through the exhaust port and a bunch of damage. I am not going 20b this time around.
|
send it to me for a rebuilb
|
Send it to me i will build you a solid engine www.znperformance.com
|
All times are GMT -5. The time now is 10:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands