Sexy drift/street roller
 

I've been drifting for around 12 years; 240sx's and most recently a Volvo wagon.

https://cimg2.ibsrv.net/gimg/www.rx7...a53ee29e09.jpg

I love 80's and early 90's styling. This is my FC build.

I paid $400 and rescued this from a dude's yard; 91 n/a.


https://cimg4.ibsrv.net/gimg/www.rx7...ab6df82be6.jpg

One trip to the VatoZone, for a fuel pump, and she was a runner.
https://cimg8.ibsrv.net/gimg/www.rx7...8a4da7b4fa.jpg

I put on some Isis coilovers and an ebay short shift kit. I ordered a new knob from ebay and had a custom shift boot made by Becka Bahr, in Phoenix.
The coilovers are decent. I haven't really put them through the paces yet. I suppose we'll see.
The short shift kit is notchy as hell and feels amazing.
I also had to switch up wheels with some of my drift spares, as the existing tires were crazy dry-rotted.


https://cimg4.ibsrv.net/gimg/www.rx7...c3409f0cf3.jpg


https://cimg4.ibsrv.net/gimg/www.rx7...39be058ab6.jpg







https://cimg3.ibsrv.net/gimg/www.rx7...b010b1037c.jpg

I don't know who's car this is, but I'm liking it A LOT!!

It is inspiration, I suppose.


https://cimg8.ibsrv.net/gimg/www.rx7...d645f825c1.jpg

I put on my Volvo wheels. They are AEZ something. 17x8.5 +13 square.


https://cimg4.ibsrv.net/gimg/www.rx7...f3598e0462.jpg


https://cimg2.ibsrv.net/gimg/www.rx7...be80dbfd97.jpg

diggin the rim setup

What are your plans as far as motor, suspension, etc?

I have never modified a rotary before, so I will begin by putting a turbo on this NA S5 motor. When that blows up, I will probably move toward a turbo2 swap. I would really like an engine putting around 300 to 350 to the ground.

As far as suspension, I'm going to make it stiff and tight. Rear steer delete and all that.

I'm keeping the full interior and upgrading the sound system.The entire vehicle is going to be stunning and relatively comfy, so I can drive this car wherever I want and enjoy myself. It will retain air conditioning.

So it seems you AREN'T doing a track slider. Seems like you're doing a weekend car meet show car. Drift cars generally don't retain things like radios - specifically upgraded, AC, interior, etc. The money you'd spend boosting the NA motor, you may as well swap now.

Think smarter, not harder. Cost effective isn't effective if you're spending your money twice.

A drift car doesn't have to be a rattling, worn out, piece of crap. Some of my favorite cars are clean, full interior builds. I typically don't go to car shows and I only attend meets if driving is involved.

Also, why swap, when I have a perfectly good engine to sacrifice?

Also, also, the words "cost effective" never crossed my mind. I'm certainly not throwing money in the garbage, but I don't plan to be pinching pennies.

Speaking of not pinching pennies, I recently acquired a set of 18" Blitz 03's. Yesterday, I dropped them off to get rebuilt and polished.


https://cimg3.ibsrv.net/gimg/www.rx7...17d5fd3018.jpg

With ISIS coils and numerous encounters on eBay, you didn't have to say much. Regardless, good luck with the build and Blitz's were a nice choice. In some decent setups, those are fantastic looking wheels.

I bought Borg s360 83/75 yesterday. It has been shipped.

I also have an artist (CJ Franks) working on a design to cover the bare, white sides of the car.


https://cimg7.ibsrv.net/gimg/www.rx7...79d524778d.jpg


Still needs color and line detail, but the excite is growing!

I also got lips for my Blitz.


https://cimg3.ibsrv.net/gimg/www.rx7...0d5eef0d8e.jpg

I'm having some sparkly gold mixed up, for the faces. This was a trial run with the gold, prior to stripping. (not sparkly)


https://cimg8.ibsrv.net/gimg/www.rx7...ac59af6232.jpg

Next will be purchase of turbo stuff, new white paint (probably sparkly) and BN sports or BN-ish sports.

Cool Build I like where this is going. Its about time someone just does stuff and worries about what happens after is happens lol.

13bREW, I appreciate the kind words. I'm just hoping that I can do this car justice.

Still a bit more to go; maybe some comets, spaceships, sunburst, etc...


https://cimg6.ibsrv.net/gimg/www.rx7...b67bc91dce.jpg

Complete! This graphic is 4ft x 2ft. After aero, bodywork and paint, this graphic is gonna look amazing! Then I'll add some silver and gold highlight vinyls.


https://cimg1.ibsrv.net/gimg/www.rx7...aee98a726b.jpg

My BW s360 came today! I really didn't expect it to be so large.


https://cimg8.ibsrv.net/gimg/www.rx7...899a6dce5c.jpg

Finished building my wheels last night. They went from 18x8 +48 to 18x9.5 +10 .


https://cimg3.ibsrv.net/gimg/www.rx7...706343363f.jpg


https://cimg6.ibsrv.net/gimg/www.rx7...3f152136da.jpg


https://cimg9.ibsrv.net/gimg/www.rx7...569107e9b7.jpg

I'm currently injector shopping. Looking at Blackops 1000/1600 setup, I'm wondering what other options are out there and if any options are necessarily more favorable.

A V-mount intercooler/radiator setup has also recently sparked my interest. I'd like to retain my A/C, so a custom condenser and lines may be in my future.

Does anyone have suggestions on preferable manifold gaskets/material?

My Glease manifold came in today!

SEXY.


https://cimg5.ibsrv.net/gimg/www.rx7...9550da9215.jpg

My next logical purchase will be a pair of wastegates. Looking at Tial 38 MV-S.

Also, also...

Proper rolling pins.


https://cimg5.ibsrv.net/gimg/www.rx7...d96d3be6bf.jpg

I'm gonna try to make a copper gasket for my 6 port turbo, I'd like to find something cheaper than $90 for the actual gasket, hopefully I can still get the sheets of copper down the street

@Thatgos4bridgy- do you just cut the shape out and roll the edges? Have you made your own in the past?