thanks for the complements everyone. The last autox of the season was today and i co drove a buddys miata turbo, so much fun ! i was within a half a second of the owner :) i also won the costume contest and got my entry fee back. Next season will be about getting rid of as much understeer as possible and dialing in my handling.
http://a5.sphotos.ak.fbcdn.net/hphot...03554678_n.jpg |
Originally Posted by rx7fc3s87
(Post 9673641)
I wouldn't trust Atkins as far as I could throw him and from what Mr. Drummond (The only certified rotary engine builder for formula Mazda) says Racing Beat's template is all wrong.
|
^ a tad random.
been a while since i updated ! have some goodies that have been installed. |
Just drained my laptop battery reading your thread. (:
Extremely nice, sets a new standard for me in "attention to detail". I'm just speechless now. ha xD |
love the pic
|
...
|
Just went through your entire build thread man... Awesome job!
|
Really nice work man
|
Car looks great! Nice work
|
omg its so clean!!!
|
Still alive
2 Attachment(s)
It has been a long time since i updated this thread. I tried to remember everything i have done to the car since the last update. I added a super nice set of GC camber plates, cusco front and rear strutbars and a lower arm brace. I also picked up a cool old momo wood wheel from a friend. If I think of any more mods i will be sure to add them later. Basically since i joined the military the car has been in storage and driven occasionally on nice days. I bought a miata to DD, now have the funds and desire to get the old rx7 where I want it to be.
Attachment 638344 Attachment 638345 |
4 Attachment(s)
The first step was dropping the rear diff to find out where a hellacious clunk was coming from and to replace a wheel bearing. Well.... turns out i replaced everything in sight while i had it out.
- MS R diff mounts - MS f diff mount - new wheel bearings and seals - new mazdaspeed dtss eliminator - new prothane C arm bushings - painted everything and POR 15 the Diff - installed a pinion snubber - urethane filled subframe mounts Attachment 638340 Attachment 638341 Attachment 638342 http://i636.photobucket.com/albums/u...psb1eb6307.jpg Attachment 638343 |
Nice to see you're still at it, going to DGRR next year?
|
5 Attachment(s)
Update! I have been terrible at updating my build thread but I wanted to document everything before I start forgetting what I have done.
Engine: - I bought a haltech PS1000 and had the harness built by LMS-EFI. - Mounted the haltech in the stock location using the factory brackets - Made a new intake (ugly MAF is gone!) - Installed Aeromotive FPR, fuel injectors cleaned, new fuel filter, new walbro 255hp - S5 TB with TPS - New A/C compressor - Dyno tuned by Jacob Cartmill made 292whp and 240wtq (pretty good for a complete odd ball turbo!) Attachment 607366 Attachment 607367 Attachment 607368 Attachment 607369 Attachment 607370 |
8 Attachment(s)
Interior:
- Used blue denim RIT dye in a spray bottle to dye the carpets blue again. It worked fantastic! - Added a 350mm momo montecarlo - Installed stereo din cover - Brand new s4 window switch (way too expensive) Attachment 607358 Attachment 607359 Attachment 607360 Attachment 607361 Attachment 607362 Attachment 607363 Attachment 607364 Attachment 607365 |
1 Attachment(s)
Chassis:
- Finished the polyurethane bushing install in the front - Whiteline front sway bar - Removed rear sway bar - New alignment - Desmond regamaster’s powder coated grey. 17x8 F 17x9 R - 245 45 17 BFG Rivals F/R - New/used T2 trans with good syncros - New full face clutch disk with a heavy pressure plate - New mazda comp transmission mounts Attachment 607357 |
7 Attachment(s)
Exterior:
- Spoiler is currently removed and I am really liking the look - I installed what I think is a s5 corksport fiberglass front lip. - Matte finish on the roof since all my clear coat is falling off. - Desmond regamaster’s powder coated grey. 17x8 F 17x9 R Attachment 607350 Attachment 607351 Attachment 607352 Attachment 607353 Attachment 607354 Attachment 607355 Attachment 607356 |
nice !
|
The rx7 is probably about to come out of her winter slumber. I worked this winter on making a radio delete panel that also functions as a tablet mount. I spent too much time on it but I am really pleased with how it turned out. I really wanted to get an eye on my coolant temps, iat, and oil temps before I start running the car hard this season.
The inside of the car is really starting to look how I want it to. I will probably delete the boost gauge and install the wideband into the glove box for a clean look. I hope to install a lighter weight corksport exhaust that I got for a steal, as well as fixing some frame rail damage that a stupid towing company caused years ago.https://cimg8.ibsrv.net/gimg/www.rx7...ed09f96cf0.jpg https://cimg0.ibsrv.net/gimg/www.rx7...9d5b94be4b.jpg |
What size intercooler pipe you have going past the power steering pump? I'm trying to avoid getting rid or power steering cause I can't find a pipe that will give better figment than the one I have now.
|
Originally Posted by florotory
(Post 12155679)
What size intercooler pipe you have going past the power steering pump? I'm trying to avoid getting rid or power steering cause I can't find a pipe that will give better figment than the one I have now.
|
Great thanks.
|
All times are GMT -5. The time now is 08:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands