My Fc TurboII build
I rarely if ever post anything and much rather act as a silent member but i figured id share my budget-minded build granted, I am a tuner at a race shop as well as tech.
SORRY low res pics/size, and being short on my info but ask away if anyone has questions i got this original 87 TurboII back in Aug 2013 it had been sitting since 1995 when the owner thought they had blown the turbo i knew had to be engine related(failed apex seal) https://cimg2.ibsrv.net/gimg/www.rx7...69b9cdc2a5.jpg after getting the car to the shop i pulled the engine as expected the rear rotor and housing was trashed https://cimg1.ibsrv.net/gimg/www.rx7...0c17c9085c.jpg i Built a engine for the time being to run the car but i wanted more prepping for power fc https://cimg9.ibsrv.net/gimg/www.rx7...8735f30fee.jpg during injector swap i always liked the vmount arrangement plus would love to do track days one day https://cimg5.ibsrv.net/gimg/www.rx7...1133be13a3.jpg budget vmount start https://cimg4.ibsrv.net/gimg/www.rx7...daba19c468.jpg i got a s6 uim port matched it to the s4 lim https://cimg0.ibsrv.net/gimg/www.rx7...f0293da3a1.jpg mean while i was working on my street port engine https://cimg5.ibsrv.net/gimg/www.rx7...afe3c2ddb1.jpg https://cimg9.ibsrv.net/gimg/www.rx7...f53234d088.jpg https://cimg2.ibsrv.net/gimg/www.rx7...7b3f93abda.jpg https://cimg8.ibsrv.net/gimg/www.rx7...7e8c5a75e1.jpg https://cimg3.ibsrv.net/gimg/www.rx7...b693099b2a.jpg a meet i went to in my NA fc here is the finished product for now https://cimg4.ibsrv.net/gimg/www.rx7...e9ae33483d.jpg Street port(pinnapple template) s4 13B-T 3mm Ra classics s4 rotors 8-Blade Holset HX35 16cm2 exhaust housing Power Fc 750 primaries 1680 secondaries 3" corksport exhaust 50mm wastegate recir'd Tcw-3 1oz/gal (like castor 927 but dont want any gummy deposits + i cant readily find it near me) spec stage 3 clutch walbro 255 my goal isnt big power but fun on the street and trackday at mid-ohio etc |
Do you have any pics of how you attached the radiator?
|
Are you running a non turbo hood still? How is the radiator set up?
|
Yeah I can get some Pictures of the brackets And yes I am running a non-turbo Hood now I had the factory Turbo 2 Hood it's a steel one I swapped out for an aluminum non-turbo Hood
|
Since the time of the original post I swapped out to a GTX 35 And Hooked up the electronic boost controller setup from the power FC I now have a Ground control switch for the boost solenoidhttps://cimg4.ibsrv.net/gimg/www.rx7...f1ec3016d4.jpg
here is a current Dyno graph of low and high boost |
https://youtu.be/M8lda9tANrg
That's a video of low boost which is 8 PSI High boost is currently 13 PSI i tuned it Kind of conservative |
Nice numbers. Pretty good HP for 13psi. I made 327whp@13psi on my gt35. Looks like your boost solenoid needs some adjusting though.
|
Originally Posted by Fuhnortoner
(Post 12224955)
Nice numbers. Pretty good HP for 13psi. I made 327whp@13psi on my gt35. Looks like your boost solenoid needs some adjusting though.
|
All times are GMT -5. The time now is 06:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands