RX7Club.com - Mazda RX7 Forum - My FC Build. (Singapore)

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- Build Threads (https://www.rx7club.com/build-threads-294/)

- - My FC Build. (Singapore) (https://www.rx7club.com/build-threads-294/my-fc-build-singapore-977307/)

My FC Build. (Singapore)

Hi all just bought a FC3S recently and will have the following mods in it.

Hope to show you guys the progress and willing to hear advise and comments from you guys. Cheers.

1)Engine. 13B-Rew- Street Ported

2)Atkins Rotary Cryogenically Treated- Apex, Side and Corner Seals.

3)4x 1000cc Injector Dynamics Injectors.

4)Sard Fuel Rail

5) Walbro 255l/h Fuel Pump

6)Garrett GT35R AR82 Turbo

7)HKS Turbo Manifold

8)Tial 60mm Wastegate

9) Greddy Intercooler Front Mount

10) Tial 50mm BOV

11) Koyo Radiator N-Flow

12)Exedy Twin Plate Clutch

13) Apexi Power Fc

14) Apexi AVC-R Boost Controller

15) XYZ Super Sports Coilovers

16) XYZ 330mm Brake Kit

17) FD3S Rear brake Conversion with Up sized Brake Rotor.

Interior

1) Defi Advance ZD

2) Defi Advance Tacho, Turbo, Exhaust Temp.

Exterior

Will remain it as it is. Maybe just touch up on the paint work.

Following are the Pictures I've took here and then.

How the car once look.
http://i1210.photobucket.com/albums/.../FC3SPhoto.jpg

Current Car
http://i1210.photobucket.com/albums/..._1878863_n.jpg
http://i1210.photobucket.com/albums/..._1973087_n.jpg
Got the engine out.
http://i1210.photobucket.com/albums/...p/BareBody.jpg

awesomeness right there

wow thats a sweet lookng fc how much did you pay ?

Bought the car without an engine. So it not that costly. ^_^

Nice Setup, you will probably want to change to a 1.06 turbine a/r however. You won't lose any response either..

Ar82" was the biggest I could get my hands on here. Not much choice.

May I ask what are the difference Im looking at with a 1.06 AR

how much was the xyz kit? and how do you find it

We are the distributor of XYZ in Singapore.

The brake kit is $1570 USD for the 330mm rotors.

More Parts Came in.

Injector Dynamics 1000cc Injectors.
http://i1210.photobucket.com/albums/...1-21133230.jpg

Summit Line Lock
http://i1210.photobucket.com/albums/...1-22100552.jpg

850 degree C Brake Pads. ( My Pads??? Sounds a little wrong.. Who cares!)
http://i1210.photobucket.com/albums/...1-21173811.jpg

More parts should come along this week.
Cant Wait.

Hey guys was thinking about a custom dash board.

Do you guys happen to have any links to share so as I could get some ideas.

Thanks.

Someone on here put on s14 dash in.

I seen one of my friends dash board in SG rewrap with fabric. Looks really good, now it has faded a little.

dam awesome parts selection.. i always appreciate these type of parts in a build up. I never heard of XYZ, sounds like a generic Asia brand?

Id love to see you mock up that FD subframe to fit it in, would be pretty unique to see with the FD running gear.

Thanks Pal. Do need some support to move on with the tedious project.

Man wish I could drop coin like that on my car.

Nice work that car looks very clean!

this car is really coming along!

hey ah pop, im in the process of doing a REW swap too. but im not sure of how to mount it... are you fabricating a custom cross mount or are you using the motivefab mounts?

Quote:

Originally Posted by Hypertek (Post 10872839)

It's basically the same as D2 and K-sport.

I will be fabricating my own mountings.

Project kinda on hold as Im rather too occupied at work.

I like the selection of parts here... Those brake calipers are HUGE. I'm anxiously awaiting more progress pictures... This is probably the sickest FC in Singapore!

I have a friend that lives in Singapore. If I ever visit him, I'll have to see this FC in person.

wow keep up the work! upload some more progress pics noww! haha

Will try to get some work done this few days.

Was planning to down the front and rear to change the bushings and spray it purple.

Will be going for a purple and black colour combi for the engine bay and under carriage.

Will upload the photos once Im down.

Thanks for the support guys! ^_^

Got some work done on the front lower arm bushings.

http://i1210.photobucket.com/albums/...-292115451.jpg

New Bushings In.

http://i1210.photobucket.com/albums/...2-29215619.jpg

Time to clean the Front Lower Chasis

http://i1210.photobucket.com/albums/...2-29181431.jpg

I got the man power! haha
http://i1210.photobucket.com/albums/...2-29181853.jpg
http://i1210.photobucket.com/albums/...2-29181859.jpg

Boost Controller Finally Came in.
http://i1210.photobucket.com/albums/...2-30193659.jpg

Still much more to be done. Rear Arm Bushings and Spray Painting on the Lower Arms.

Any new updates, pics?

Got the lower chasis sprayed.

http://i1210.photobucket.com/albums/...1-03193236.jpg

http://i1210.photobucket.com/albums/...1-03185331.jpg

I like the colour quite a bit.
Will go for a purple, black and red colour combination.
Stay tuned guys. ^_^

looking great so far, keep up the good work!

Looks very nice. I'm planning an rew swap into my 87 fc US model. How are you planning the custom fabrication to mount the motor? I need some help. Beautiful build tho!

WOW! this is shaping up to be quite the build.....will stay tuned

hey hows the build going? any updates?

Have been really busy and left the progress of my car for a few months.
Finally got the engine assembled with the fuel rail,injectors etc. ^_^

http://i1210.photobucket.com/albums/.../EngineUps.jpg
http://i1210.photobucket.com/albums/...ndInjector.jpg

Love the engine! Everything is looking REALLY good.

Man, all the time that it has been since you've updated your progress, you could have had a set of these by now. -> https://www.rx7club.com/group-buy-pr...colors-979002/

Quote:

Originally Posted by ah_pop (Post 10867605)

FD half cut came in. ^_^

http://i1210.photobucket.com/albums/...-041353211.jpg

Its mine! haha
http://i1210.photobucket.com/albums/...1-04135327.jpg

13b-rew out!
http://i1210.photobucket.com/albums/...1-06174802.jpg

Got some custom keys!
http://i1210.photobucket.com/albums/...0-28085341.jpg

Where did you find those keys?!

you could get the blank keys from ebay.

just search "rotor key". You'll see it. ^_^

should have gotten it. wun want my omp lines to be clogged up in any situation.

Quote:

Originally Posted by ah_pop (Post 11192671)

you could get the blank keys from ebay.

just search "rotor key". You'll see it. ^_^

Thanks, man!

you suck i'm so jealous. i wish i was doing something this legit.

I WANT KEY CHAIN AND KEY! lol no serious i want one. where do i get one? can you pm me some info on it. also car is coming along good keep it up

Very nice. I will be sure to follow up on this one.