My fc build from 04 till now
Owned a few fcs before this one. had a first gen, a couple of 2nd gens with the dream of owning a t2 back in the day. finally caught eye on a 88 t2 non running that i traded for a running 87 gxl. got it home found a loose fround added good gas and fire it right up haha. has come a VERY LONG WAY since then. havent really done a full build thread till now. well here goes....
this is when i got the car. stock 88 t2 few bumps and scratches... engine a mess lol |
how i got her...
|
more pics....
http://img825.imageshack.us/img825/9...tdanshouse.jpg Uploaded with ImageShack.us http://img27.imageshack.us/img27/309...boiiengine.jpg Uploaded with ImageShack.us |
got in a fender bender.... :(
http://img339.imageshack.us/img339/945/turboiihood.jpg Uploaded with ImageShack.us front end didnt end up looking so good.... for now... http://img22.imageshack.us/img22/9200/rx7frontview.jpg Uploaded with ImageShack.us http://img29.imageshack.us/img29/6846/img0268db.jpg Uploaded with ImageShack.us http://img827.imageshack.us/img827/4492/img0269cr.jpg Uploaded with ImageShack.us |
perforfance upgrades now...
http://img541.imageshack.us/img541/3199/img0507o.jpg Uploaded with ImageShack.us http://img200.imageshack.us/img200/9180/pict0861.JPG Uploaded with ImageShack.us http://img832.imageshack.us/img832/1374/img0724vx.jpg Uploaded with ImageShack.us http://img571.imageshack.us/img571/53/img0725xhs.jpg Uploaded with ImageShack.us alot of other parts as well i dont have pics for... |
cosmetic time!!
http://img19.imageshack.us/img19/7977/pict0855q.jpg Uploaded with ImageShack.us http://img69.imageshack.us/img69/73/pict0857e.jpg Uploaded with ImageShack.us |
got a haltech e6k, went meth injection, 720 pri 1680 sec, walbro 255, etc
got all body trims installed and new wheels finally... http://img442.imageshack.us/img442/4296/img0302ji.jpg Uploaded with ImageShack.us |
Went e85 and ran 18 psi on the t67
http://img545.imageshack.us/img545/6571/img0943d.jpg Uploaded with ImageShack.us After that.....DYNO TIME!!! made 512hp at 18psi http://img688.imageshack.us/img688/6572/img1909jv.jpg Uploaded with ImageShack.us |
dyno vid
idling doing a pull |
racing at firebird raceway boise idaho...11.32 @ 122
http://img6.imageshack.us/img6/3263/img2410ek.jpg Uploaded with ImageShack.us im finally at where im at right now... throwing in a haltech sprint re, all act clutch stuff, crank trigger kit and misc goodies haltech sprint re http://img32.imageshack.us/img32/303...0219111535.jpg Uploaded with ImageShack.us e85 walbro 400 http://img521.imageshack.us/img521/8638/walbro400.jpg Uploaded with ImageShack.us act pro lite, act xtreme pressure plate, act throw out bearing & pilot bearing... http://img600.imageshack.us/img600/7...liteclutch.jpg Uploaded with ImageShack.us FFE crank trigger kit (btw jason is a badass) http://img341.imageshack.us/img341/8...triggerkit.jpg Uploaded with ImageShack.us |
finally decided to paint the dull stock white engine bay... pretty happy how it came out...
stock engine bay before... http://img825.imageshack.us/img825/9756/stockbay.jpg Uploaded with ImageShack.us freshly painted bay... http://img21.imageshack.us/img21/4442/paintedbay.jpg Uploaded with ImageShack.us freshly painted bay with motor how it sits to this day.... http://img6.imageshack.us/img6/9569/...ywithmotor.jpg Uploaded with ImageShack.us |
Gona start throwing the Haltech RE starting monday along with all the new goodies.... will be posting pics of my progress. hope you all enjoyed the pics, it was alot of work rounding them up lol
|
got alot done today, got most of the haltech mostly done & FFE crank trigger installed. just got to run some power and ground wires. Also i need to install the walbro 400. just ordered some aem smart coils as well.
http://img803.imageshack.us/img803/2669/enginebayj.jpg Uploaded with ImageShack.us http://img208.imageshack.us/img208/5...rinstalled.jpg Uploaded with ImageShack.us http://img543.imageshack.us/img543/3...almostdone.jpg Uploaded with ImageShack.us |
tip, if you plan on running the stock coils, you need to mod them to get them to work. otherwise, they wont work.
if you want, i can sell you my coilpacks. Mine work just fine. |
Originally Posted by SirCygnus
(Post 11387886)
tip, if you plan on running the stock coils, you need to mod them to get them to work. otherwise, they wont work.
if you want, i can sell you my coilpacks. Mine work just fine. |
looks like in pic the eshole front part of that t2 hood was pushed in?how hard was it to get that straight again?im sure its alum?
|
Originally Posted by southsidecox
(Post 11387916)
looks like in pic the eshole front part of that t2 hood was pushed in?how hard was it to get that straight again?im sure its alum?
|
6 Attachment(s)
|
5 Attachment(s)
Attachment 670888
Attachment 670889 Attachment 670890 Attachment 670891 How it currently looks Attachment 670892 |
awsome build man! Im currently working on doing up my t2. could you post some details of your systems. Fuel , cooling etc. also turbo setup , are u still using the t67 was size wastegate u running? Very interested :)
|
Originally Posted by joeroulston
(Post 11506443)
awsome build man! Im currently working on doing up my t2. could you post some details of your systems. Fuel , cooling etc. also turbo setup , are u still using the t67 was size wastegate u running? Very interested :)
S4 t2 engine Act pro lite flywheel Act xtreme pp Act full face disc E85 Walbro 400 An -6 fuel hose Aeromotive fpr 720/1600 injectors Greddy fmic Hks 40mm wg Custom built 3" ic pipes Garrett t67 turbo Aem ign-1a coils Haltech sprint re Ground control coilovers with tokico illumina struts Custom double pass 2 core aluminum radiator That's all I can think of...thanks again! |
2 Attachment(s)
|
Nice build... Let me kno how you like that Sprint RE
|
Originally Posted by RxManny
(Post 11514021)
Nice build... Let me kno how you like that Sprint RE
|
Thanks for the info man, trying to get as many ideas as i can for my build. Quick question how do you get the rear seats out easiy , ive been looking for a nut to undo but its a bit of a puzzle.haha the simple things.
|
All times are GMT -5. The time now is 11:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands