I will never give up!!!!!
I have been build build my RX7 for a while now i got the car when i was 17 i have had to ask myself many time "is it worth it to continue" and the answer has always been yes!!
my car has taken some time and well ill let my pics do the rest of the explaining for me. http://i962.photobucket.com/albums/a...agejpeg950.jpg this is the first night i got my rx7 on the trailer 5 different colors dents and all. http://i962.photobucket.com/albums/a...220001833a.jpg Damage on the door looks like some crazy person bit the door http://i962.photobucket.com/albums/a...0308001701.jpg After some body work got it in primer starting to look better. notice no front bumper bit that not it yet. http://i962.photobucket.com/albums/a...0422001527.jpg this is the base coat dull and boring! http://i962.photobucket.com/albums/a...0422001644.jpg then came the clear coat and we started to look good:) http://i962.photobucket.com/albums/a...0424001502.jpg i let the paint dry and fitted my intercooler still no front bumper http://i962.photobucket.com/albums/a...0330001326.jpg so at this point i got board and started to work on the engine i found out i had bad irons so i got those replaced and did a large street port with ALS seals http://i962.photobucket.com/albums/a...0412001824.jpg got all my fuel system setup aeromotive all earls hose and fittings 2300 Secondaries http://i962.photobucket.com/albums/a...0330001503.jpg fitted a turbo but this stuck out way to far so a got a garret T67 http://i962.photobucket.com/albums/a...05001308-1.jpg So then the motor went in the car with the right turbo and the wiring of the haltech E6K started. [IMG]http://i962.photobucket.com/albums/ae106/BOOSTDBSTRD/FROM%20MY%20PHONE/Richies%20rx7%20build/0611002025.jpg[/IM] Intercooler Piping started going in with the gready RS BOV. http://i962.photobucket.com/albums/a...617001226b.jpg then installed the Koyo Rad this think is worth its weight in Gold!!! Never got hot. |
Continued
http://i962.photobucket.com/albums/a...0526002153.jpg
Here is the test fitting of the new bumper before paint. http://i962.photobucket.com/albums/a...0707001741.jpg This is the bumper after i painted it and did my own air brushing I've done all the paint and body work at this point its starting to look good. http://i962.photobucket.com/albums/a...0707001740.jpg this is my special design for the V8 guys hahahaha hahahahahttp://i962.photobucket.com/albums/a...0702001758.jpg then i was at this point these tires and wheels came with the car they ar 19's and make the car look like a truck trust me they rant the ones I'm keeping on here. http://i962.photobucket.com/albums/a...617001226a.jpghttp://i962.photobucket.com/albums/a...0617001226.jpghttp://i962.photobucket.com/albums/a...0707001936.jpg http://i962.photobucket.com/albums/a...0707001933.jpg Did some more Airbrushing and got to here. http://i962.photobucket.com/albums/a...0707001937.jpg this is stage one completedhttp://i962.photobucket.com/albums/a...0712001058.jpg STAGE 2 wheels tires and more modshttp://i962.photobucket.com/albums/a...0712001058.jpg Megan Coilovershttp://i962.photobucket.com/albums/a...0624001416.jpg these are the wheels i picked 18's 9.5 wide in the rear 8.5 front staggered. |
Looking good...paint came out great! Hope mine looks that foot when done.
|
Originally Posted by schaft
(Post 10922239)
Looking good...paint came out great! Hope mine looks that foot when done.
|
Originally Posted by schaft
(Post 10922239)
Looking good...paint came out great! Hope mine looks that when done.
|
Stick with it man. Color looks good. Was considering red for my car as well.
|
Its looking real good! Wow
|
Looks great! Really good work here... Engine specs? ECU??
|
Love this build except the gay no piston sticker on the bumper and them wheels. Aha never been a fan of chrome.
|
more pics
so now here is the wheels on the car and it slammed to the ground
http://i962.photobucket.com/albums/a...0build/623.jpg I love this pic it my favorite.http://i962.photobucket.com/albums/a...0build/436.jpg Different angle.http://i962.photobucket.com/albums/a...0build/614.jpg I got creative here and recessed some LED lights into my Flash to pass lights i love this they are way bright.http://i962.photobucket.com/albums/a...0build/870.jpg the door james were faded red so i painted them to match i did all my own paint in our shop. I spent hours on this car. http://i962.photobucket.com/albums/a...20CARS/620.jpg This isn't where my story ends though. my car looks so sweet in this pic. http://i962.photobucket.com/albums/a...0build/628.jpg I invested some money and did stainless steal break lines with Bare brakes. cross drilled and slotted. http://i962.photobucket.com/albums/a...0525001944.jpg then it was time to install the methanol KIT 2x 15GPH squirters. with a 2.5 gallon tank http://i962.photobucket.com/albums/a...0709001843.jpg i covered up the idiot cluster i have a gauge for about everything in this car but this isn't the final pic yet. |
Originally Posted by Celestial-Fc
(Post 10922401)
Love this build except the gay no piston sticker on the bumper and them wheels. Aha never been a fan of chrome.
|
The Worst part of my story thus far!!!!
So after all this work it was time to take it to the track and get it tuned. Im working with the HALTECH E6K system. I'm going to be going to the new sport 2000 or platinum what ever they call the big one now. we started tuning the car at 25LBS of boost on a built motor. i went through 2 rear irons from detonating at the track. so the third time is the charm i got it right. But right as we started the last stage of tuning we were cruzin the freeways racing cars we raced a brand new 2011 Z06 vette and wasted it it was funny to see the owner of a vet's face drop when he found out he got smoked by a 1.3 liter rotary.
So after the race we found a lean spot right in the beginning of the spool up so we fixed this. Well this is where my story gets sad, i wanted to do one last pull in my baby before heady back home. So i dropped a gear and gave her hell and it was amazing. Intill i heard a pop of an intercooler pipe (we found this out after the fact) and i slowed down all of the sudden i see a trail of smoke so i thought oil cooler line, as i slowed the smoke got really heavy. Before i came to a stop i heard a loud BANG and a blast of fire popped my hood open, then the worst happened my car caught fire and it wasn't good at 25lbs of boost i blue a hole in a cuppler and the heat from the turbo got my meth line pliable enough and it popped out of the intake under boost and then let my car up the switch stayed in the on position because the fire melted it like that. i had a batter kill switch because my batt is in the back of the car. we started to pelt the car with dirt until the fire dept. showed up. THEY DID A GOOD JOB THANKS GUYS THEY CAREFULLY MISTED MY SEATS TO KEEP THEM SAFE AND GOT THE FIRE OUT AFTER A WHILE. So now is where i say is it time to Give up NO NO NO NO I WILL NOT!!!!!!!!! http://i962.photobucket.com/albums/a...-54-27_382.jpghttp://i962.photobucket.com/albums/a...-54-32_202.jpghttp://i962.photobucket.com/albums/a...-54-37_108.jpghttp://i962.photobucket.com/albums/a...-54-44_779.jpg http://i962.photobucket.com/albums/a...-54-50_175.jpg SEEING THESE HURT GUYS!!!! hahahah o well time heals all wounds (in this case money!!! her is some damage http://i962.photobucket.com/albums/a...build/1311.jpghttp://i962.photobucket.com/albums/a...-40-59_648.jpghttp://i962.photobucket.com/albums/a...-39-39_851.jpghttp://i962.photobucket.com/albums/a...-10-15_600.jpghttp://i962.photobucket.com/albums/a...-14-15_436.jpg i have already started fixing her again i will not give up what do you guys think is it worth it ill take pics of the newest progress so far I've put the car on the back burner for a while so i could gather some case but i did get all new black dash and intire interior ill get pics soon. |
Damn, was coming along great too. Makes me second guess putting in my meth kit, although I'll probably just run water and tune with out it.
Good luck |
Don't give up bro...she's a beauty ..just remember that once your done with her there won't be another like her ..one of a kind...not bought built...
|
Originally Posted by D2380
(Post 10923162)
Don't give up bro...she's a beauty ..just remember that once your done with her there won't be another like her ..one of a kind...not bought built...
|
Originally Posted by dwb87
(Post 10922348)
Looks great! Really good work here... Engine specs? ECU??
|
Originally Posted by jaggermouth
(Post 10923158)
Damn, was coming along great too. Makes me second guess putting in my meth kit, although I'll probably just run water and tune with out it.
Good luck |
theres really only two words I can say......HOLY SHIT.
Glad the fire didnt do more damage!!! |
Maybe something is just wrong with the meth setup, I have seen plenty of street driven meth/water injection engines that get through just fine.
|
bad
Ya IM not Giving up on her but I'm doing away with the meth i managed to lock down a 50th anniversary edition black interior and dash so I'm going that route. but the meth kit has cost me 2 motors and now three but this time it was working we figured it out and this time i broke the motor because i made over 550 hp to the ground because the torque cracked the front Iron.
|
Front Iron prob cracked because of detonatin at that boost level. I cracked a rear one because of it 2 seasons ago.
One suggestion since she will need an overhaul; I would change to a v-mount or h-mount setup, way better than the big wall of intercooler. I had major probs at the track with oil temps. Blew a turbo that way. Coolant was not very good either even with a koyo. Unless you plan on making a duct to the oil cooler some how under or around the IC. Anyway just a thought. Car looks prestine and the airbrush looks good too Here are some pics of what im working on this winter. [IMG]http://i161.photobucket.com/albums/t...125_175655.jpg[/IMG] [IMG]http://i161.photobucket.com/albums/t...125_174835.jpg[/IMG] |
damn bro nice you have help me in knowing that my decision to keep working on my FD is the right choice an i should keep on. I have been building my FD for the last 7 months an i have spent like 4 gs so far but i will make it run thanks to you an your efforts of not giving up.
|
can switch to E85 or switch to 49/51 injection, less than 50% methanol and 51% or more of water the mixture becomes non combustible and will not catch fire if you catch a leak. also another reason i'm not too fond of pre-turbo injection. i have never had such issues and have installed a number of kits.
anyways, keep at it. |
keep working
im figuring out a way of running e85 without a surge tank and me and my dad may have come up with a brilliant idea,:nod: ill post new pics soon of the progress.
|
and straight alcohol auxiliary injection will not really support 25psi+ for long if at all. straight water actually will with pump gas. E85 can be done non sumped with an upgraded supply line and even a single pump as there are new high flowing pumps out there that should push close to 500whp on E85 with a single pump setup.
almost looks like you lost another rear iron in the picture with the trail of oil behind the car. that's just too much for that setup. E85 alone is good for about 30psi before you have to worry again about getting close to knock threshholds but getting enough fuel through the system is a little more tricky than pump gas. but it's good to see people with perseverence these days, so many people give up easily. trial and error are sometimes your friend no matter how painful it may be, in the end the satisfaction is worth it. i have had plenty of problem cars in the shop and i can't merely push them out and give up. |
All times are GMT -5. The time now is 04:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands