BMW powered fb
9 Attachment(s)
This is a continuation of a previous thread, to see previous work on this build check out: https://www.rx7club.com/build-thread...1096220/page2/
or if you cant wait for all that, here are the specs so far.. -fb chassis -rx8 subframes and suspension -rx8 full interior -rx8 4.44 LSD -e36 m3 engine and 5speed -miata steering assembly Attachment 751632 The rear end is slowly coming together, I picked up some 3/4 grade 8 shoulder bolts for the rear subframe and bored out the subframe mounts 1mm to match. Attachment 751633 Attachment 751634 Attachment 751635 Attachment 751636 Attachment 751637 Attachment 751638 Attachment 751639 Attachment 751640 |
8 Attachment(s)
Attachment 751624
Attachment 751625 Attachment 751626 Attachment 751627 After de-sound proofing the floor pan, I found some more rust spots Attachment 751628 Attachment 751629 Attachment 751630 Attachment 751631 |
7 Attachment(s)
I picked up some doors that had working windows and weren’t dry rotted to hell but had been resprayed in red (poorly). Since I already had a set that were primed and painted, I swapped over the seals and windows. The RX8 handles and pads are a nice modern touch!
Attachment 751617 Attachment 751618 Attachment 751619 Attachment 751620 Attachment 751621 Attachment 751622 Now i just need to add some handle straps and wire up the window regulators Attachment 751623 |
8 Attachment(s)
The interior is coming together nicely, the dash extends too far rearward over the shift turret but a little trimming cant hurt.
Attachment 751609 Attachment 751610 These RX8 brakes are massive and the only 16's I found that cleared were some BMW bbs mesh, which were sick, but would require a 5x120 hub conversion. I then proceeded with the next logical choice and picked up some lexus wheels: OZ superturismo 17x9 +50 wrapped in 205/40/r17. Attachment 751611 Attachment 751612 Attachment 751613 Attachment 751614 Attachment 751615 Attachment 751616 |
This is definitely ... different. Interesting fab work and looking forward to seeing the end product.
|
Shame about the renesis.
This is some fine work, regardless. |
Originally Posted by 7Suns
(Post 12179481)
Shame about the renesis.
This is some fine work, regardless. yeah, would’ve been nice to keep it all mazda but that motor had some issues and from what I can tell they’re not really worth rebuilding |
re-subbed.
|
Wow, this is the difficult way to make an NC Miata for sure!
But really, nice project! What are these type of "Pro Touring" builds called for imports? |
Love the emblem.
|
I like the wheels, wonder how they'd look on an FD...
|
Whoa. Awesome AS!
|
Stance and wheels look nice, have you finished the rear strut mounts yet?
|
fab
nice work. nice to see someone else who is willing to change things up. Looking forward to the rest of this build.
|
subscribing to this thread as well. love all the custom work.
|
Love this build, I am going to keep my eyes on this build.
|
9 Attachment(s)
I'd been waiting on some cheap coilovers to pop up for some time and then I found these rx-8 powertrix for $600, never even installed! they seem decent, the springs may be a little stiff for a 2300lb car but they'll be fine for mocking up the rear shock towers.
Attachment 751105 I primed some things, patched some rust spots and got the seat mounts installed Attachment 751106 Attachment 751107 Attachment 751108 Attachment 751109 Attachment 751110 Attachment 751111 Attachment 751112 Attachment 751113 |
8 Attachment(s)
I picked up another chassis the other day.. an '85 GSL-SE with clean title, not wrecked, rust free, good paint, sunroof, full interior, etc. basically everything the '79 wasn't. I pretty much decided upon buying the car that everything would be swapped over. Most of the work I'd done up to this point was unnecessary for the new shell like sanding, priming and rust repair, but I took it all as a learning experience. I jumped right in in with a better understanding of what to cut out, what to keep, it just felt right this time.
Attachment 750939 Attachment 750940 Attachment 750941 Attachment 750942 Attachment 750943 Attachment 750944 Attachment 750945 Attachment 750946 |
11 Attachment(s)
The new sub frames lined up perfectly, everything was level and squared off to the .01" Its kind of a german rx-8 fastback NC miata thing lol. Either way I'm pretty excited how this project is unfolding.
Attachment 750928 Attachment 750929 Attachment 750930 Attachment 750931 Attachment 750932 Attachment 750933 Attachment 750934 Attachment 750935 Attachment 750936 Attachment 750937 Attachment 750938 |
6 Attachment(s)
|
I love all the custom work your doing yourself. Home built projects are my favorite. Glad to see your local to me, I hope to see this car running around soon. I've been considering putting the Rx8 subframes in a 1st gen for awhile but I've been scared to cut one up that much, its an eye opener watching you do it. I can't wait to see the final result, if you ever want a helping hand let me know!
Matt |
Originally Posted by highnitro12187
(Post 12222029)
I love all the custom work your doing yourself. Home built projects are my favorite. Glad to see your local to me, I hope to see this car running around soon. I've been considering putting the Rx8 subframes in a 1st gen for awhile but I've been scared to cut one up that much, its an eye opener watching you do it. I can't wait to see the final result, if you ever want a helping hand let me know!
Matt |
Killin' it! New shell looks like a super clean slate to work from.
|
cool build
looking great. I love these kinds of builds. peoples imagination never ceases to amaze me.
|
I'll definitely be watching this. Love fab work!
|
All times are GMT -5. The time now is 09:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands