|
Haha yes my k24crx was loud inside even with a quite exhaust. Idk how well it's going do when going 4"do all way to back and can't make up my mind about wastgate dumps yet ;) I've been just working like crazy so no time to work on it :( just stacking up parts for it now.
|
4 Attachment(s)
nothing major for updates yet. Just been working like crazy so haven't had much time to work on it:(
Fresh powdercoated subframe Attachment 660188 super pro bushing Attachment 660189 Ohlins put on:nod: Attachment 660190 Pic elliot sent me of motor Attachment 660191 |
Nice build.
If it helps I used this stuff http://bit.ly/18nTnLF no sticky poo in my car lol I also used sound deadener on the under body. Havnt sound tested it yet but I guess the in car sound would be 30dbs wot Nvm link is dead now lol |
Looking killer man. What oil pan is that?
|
this car looks like a work of art makes my ratty POS feel... frankenstienish..
|
Thanks, has a long way to go yet. It's a excessive one I believe. Elliot had it in stock so just went with it. Hold an extra quart to lol
|
Grinch, car looks great, that blue is going to look awesome, I think the Kevlar weave CF would look good but that's me...
A -6 line is enough fuel for 500hp, BUT not on E85 since it takes so much more volume to create the same power you would need a -8 at minimum...
Originally Posted by dgfab
(Post 11577631)
If one were to dynamat the whole interior of a car is it quite effective at eliminating road noise?
A very very good read on sound dampening... https://www.rx7club.com/showthread.php?t=151598 Go through that, you will get a very good idea on how to properly quiet your car down J. |
Lol you read mind, Kevlar everything in pla
|
-8 feed by way
|
-12 fw! ;)
|
1 Attachment(s)
Small update, after got off work today started making lines for my surge tank setup. Man ss tubing is a whole another thing lol. Thinking about add a fuel cooler now.
Attachment 659590 |
2 Attachment(s)
Update, got the motor back =]
turblown built sp, studded, goopy seals, xcessive pan and lim(4 id2000) 2 id1000 primary going be on e85 30psi Attachment 656275 Attachment 656276 |
Hope you have it done for PG! :) so we can kick but in Auto X!
|
5 Attachment(s)
Motors in finally! Still gotta get stuff coated Matt black before bolting it all on. Now can finally get some of this box's of parts emptied and put on the car.
Hard lines made Attachment 654352 Vbands :) Attachment 654353 Attachment 654354 Got my clutch setup on Attachment 654355 Motor sitting in now Attachment 654356 |
looks awesome! No clearance issues on the turbo near the chassis?
|
Tons of room to spare, think that blue makes it look closer then what it is.
|
part list update:
Engine- Large street port Goopy seals Turblown stud kit xcessive lim ported uim rotary works tb and tb elbow New water pump Xcessive oil pan Irp track mounts AEM coils dual 34 row oil cooler(need order) Turbo setup tdx67bb 1.15ar t4 divided(turblown specs) dual tial 38mm wastegates Turblown twin scroll with dual egts 4" dp and all way back with dual mufflers vmount setup tial 50mm bov Drivetrain/Suspension/Brakes ACT Xt six pluck with lightweight flywheel Super pro bushing stock diff/trans (lsd/ t56 coming down road) Diff cradle Ohlins DFV road and track Still need to buy rotors and pads Eneki rpf with 275 a6(need order still) auto cross setup still need to get wheels and tires for street/ track days Fuel- 2 id1000 primary injectors 4 id2000 secondary injectors 2 bosch 044 in surge tank 255 in gas tank afpr w/ gauge 8an feed 6an return Full function fuel rails mangement/wiring Adaptronic p&p Rywire mill spec engine harness with quick disconnect Innovate mtx gauge setup Innovate tc-4 & ssi-4( for other sensors to datalog) Fuel pressure sensor oil pressure sensor egt sensors Aim race pack cluster Full Function trigger wheel kit I'm probably forgetting things but got more stuff on the list and some of that is undecided. |
Out of curiosity, where'd you get the surge tank setup? It looks purpose built for the FD.
|
Integrated engendering I believe is who made it.
|
2 Attachment(s)
|
Looking good! Hope you can figure out your Fuel rail issue! I guess I kinda lucked out with Elliot making a custom rail for me..
|
Shawn it's my middle set if id2000, you only have two right? The normal two clear easy just those darn two middle ones lol. If that's my biggest issue if the build I'll tKe it.
|
Talked to full function today and sent them pics and they did some looking and sending me stuff to fix the issue. Good customer service.
|
Got care package today from full function to fix my secondary fitment issues. Guys really take care of there customers right. Probably why I buy everything they sell. Lol
http://i209.photobucket.com/albums/b...pspuqq7rkq.jpg |
Bingo! Love FFE!!
|
| All times are GMT -5. The time now is 05:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands