|
JDM FD 20B Built
6 Attachment(s)
Hi, here a built thread from Québec, CANADA!
My friend want a 20b rx7 so he ask me if i want to build it for him with his help. How can i said no to that! So here the car fresly paint: Attachment 644240 And here the motor 20B C code: Attachment 644241 Attachment 644242 Attachment 644243 Attachment 644244 Attachment 644245 We are both french Canadian so excuse our bad english ;) |
11 Attachment(s)
Time for the longblock to becore a little shorter
Attachment 644229 Attachment 644230 Attachment 644231 Attachment 644232 Attachment 644233 Attachment 644234 Attachment 644235 Attachment 644236 Attachment 644237 Attachment 644238 Attachment 644239 |
7 Attachment(s)
Time to open the beast:
Attachment 644222 Attachment 644223 Attachment 644224 Attachment 644225 Attachment 644226 Attachment 644227 Attachment 644228 |
5 Attachment(s)
|
12 Attachment(s)
LargeStreet port:
Attachment 644205 Attachment 644206 Attachment 644207 Attachment 644208 Attachment 644209 Attachment 644210 EP4A exhaust port with FD sleeve: Attachment 644211 Attachment 644212 Attachment 644213 Attachment 644214 Attachment 644215 Attachment 644216 |
12 Attachment(s)
|
1 Attachment(s)
Now ready to assemble!
Atkin 20b full rebuilt kit with solid corner seal Goopy Apex seal That all for now! We hope to put the motor back together next weekend but first i have to made a engine stand adapter for 20b and a jig to grind the side seal to spec! Attachment 644192 |
Ugh that looks so delicious. I would love to have my 20B ported, I can only imagine how crazy it'd be.
|
Originally Posted by LoneStarS30Z
(Post 11745545)
Ugh that looks so delicious. I would love to have my 20B ported, I can only imagine how crazy it'd be.
|
Nice build. Subscribed!
|
No photo yet but right now i just fit the fd front cover, waterpump and alu braket that hold the fd power steering pump. The alternator would be in the place of A/C unit and i custom made a double idler pulley and double waterpump pulley.
I order next week an xcessive short lower manifold and 6 port injector fuel rail. Tonight i will make the engine stand adaptor plate to hold the 20B and also the jig to grind down the side seal to spec! |
This is going to be fun to follow. Looking good!
|
1 Attachment(s)
|
sub'd
|
Small update but no pic yet! I order the excessive shorter lower intake manifold with the new secondary fuel rail made by FFE with 6 port injector!
|
2 Attachment(s)
Just finished my custom double waterpump pulley and will have my custom double idler pulley tomorrow. Xcessive lower intake manifold and FFE fuel rail should arrive next week
Attachment 641720 Attachment 641721 |
Awesome!
|
Double belt water pump, very interesting idea but why not go with electric water pump or add a pivot pulley?
|
Originally Posted by bufferovrflo
(Post 11766424)
Double belt water pump, very interesting idea but why not go with electric water pump or add a pivot pulley?
We will run an adaptronic e1280s ecu with AEM smart coil and 6 ID1000 secondary with twin denso pump in parallel! Everything will be order soon |
3 Attachment(s)
Custom made double idler pulley!! I use 2 FD alternator pulley and made a new center housing with 2 6000vvc3 bearing
Attachment 641665 Attachment 641666 Attachment 641667 |
cool! #subscribed :cool:
|
What turbo is going on this? Subscribed!
|
Originally Posted by Turblown
(Post 11766931)
What turbo is going on this? Subscribed!
|
Holy clean 20B batman! Nice work so far, can't wait to see where this goes!
|
8 Attachment(s)
Idler pulley almost done! Just need a good cleanup and paint!
Next is the alternator placement under the power steering pump! Attachment 641604 Attachment 641605 Attachment 641606 Attachment 641607 Attachment 641608 Attachment 641609 Attachment 641610 Attachment 641611 |
| All times are GMT -5. The time now is 06:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands