Jayscoobs Budget Build Thread
 

I finally decided to make a little build thread about how far I came in the car enthusiast world. Now keep in mind I only have done simple bolt on parts to my WRX and RX8 that was prior to this car. RX8 actually made me fall in love with rotaries and I missed boost from the WRX so the FD is best of both worlds. But the FD made me learn to wrench and get the great satisfaction of finishing something and say you built it. I built this with a very low budget so this isnt a all out build, It will be eventually.

Car History:

I was looking for a FD shell because I figure I can build one far cheaper than the 16k that people were asking for stock FDs. I was about bargaining lol. I found this 93 VR FD for sale. 97k miles for 4k, still had A/C and interior so I had to jump on it.
Attachment 682033Attachment 682034Attachment 682035

Previous owner had plans for a V8 which is why it became a rolling shell. In my eyes I wouldnt give a rotary car a V8. I bought a longblock from Japan2LA, took a very long time to show up here. We all know how bad that guy is. Here it is

Attachment 682036

First things first, blow up the vacuum diagram and replace all the hoses with silicone as well as the JDM harness with a USDM harness

Attachment 682037Attachment 682038

I put it all back together and got the car running. But I did a rookie mistake and didnt notice the fans werent coming on until its too late. But its okay, 20 year old coolant seals in there, engine should be refreshed. Took it all apart again. Had the help of JBronson on this motor build. Good thing we did take it apart. Both stationary bearings were shot.

Attachment 682039

Heres the teardown. I didnt have help with this and did it on a milk crate lol. Also did the cleaning myself.

Attachment 682023Attachment 682024Attachment 682025Attachment 682026Attachment 682027Attachment 682028Attachment 682029Attachment 682030Attachment 682031Attachment 682032

Didnt take much build pics.

Attachment 682020Attachment 682021Attachment 682022

Hey. I was the guy that sold you the rolling shell. Haha.

good to see that your build has progressed this far. Good luck with everything!

I just went for all reliability mods and the bare essentials. Water temp and Boost gauges.

Attachment 682017Attachment 682018http://i12.photobucket.com/albums/a2...ps4367985d.jpg

Freshly Detailed. My friend has got some skills. Looking good for 20 year old paint.

Attachment 682019

I got a lot of parts for cheap. total build up until this point is 8k. Break In period almost over, time to have some fun. Completely stock with the exception of these.

Full silicone vacuum hoses
OMP block off (The OMP is bolted out of sight until I get a Power FC just so she doesnt go limp)
AEM water and boost gauges in the A pillar
Downpipe
FC Thermoswitch
Aluminum upgraded radiator
Trust Exhaust

Plans is to finish off how I want the engine. Plan on keeping the twins and just doing intercooler and Intakes. Power FC. And Hi Flow Cat or Resonated Mid. Then to start overhauling suspension and exterior.

Thanks Bro! Hey did you ever finish your car? Did you ever do that Veilside Fortune Kit?

Looking nice! I like how the gauges turned out too. Now i just have to finish my money pit taking up room in my drive way.

Haha Yeah we need to go to Sevenstock this year. Im sure yours will be done by then. I still can't get my boost gauge to work properly, I have to call AEM on Monday.

Haha yeah the build is pretty much done.

I actually ended up selling the Veilside fortune kit because I realized having that much horsepower and a full body kit was not a good combo. I want to be able to actually drive it around without worrying which side of the car I was going to crack next.

Here's a kinda old pic of my car in its current set up:

Attachment 681913

Made 670 hp to wheel at 10 psi. =P

Where are you located again? Maybe we could meet up one of these days. I'd like to see in person what you turned my old roller into. :icon_tup:

Thats a lot of power. Id love to ride in it lol. Im in Antioch but I should be working in fremont soon and eventually moving back down there. So I shall be closer lol.

Went to EuroSunday. These people got some serious money. That Ferrari is chick owned, and apparently she has 3 Ferrari's and actually tracks them. That particular model is a a rare one, apparently only 500 made.

Attachment 681565Attachment 681566Attachment 681567Attachment 681568Attachment 681569Attachment 681570Attachment 681571

Where was that event at??

Walnut creek. Very small event. Mostly older people with their euro cars. I have more pics. Forgot to upload them.

Got a few things from Mazdatrix. SS braided clutch hose and 2 quarts of Idemitsu Premix.

Attachment 680138

Finally decided to pull the trigger on a Power FC.

Attachment 679332

Installed, I guess my neighborhood didnt know I have a FD. It never stays outside of the garage. Had so many people slowing down and staring and thumbs up. I guess it could also be that I was doing the idle learning process on the street. Heres my commander holder for now until I pick up the Banzai mount.

Attachment 679200

looking great so far keep up the good work!!

Attachment 677515

Super stock FD! lol

Some new parts - Greddy Airinx intakes, and RE Amemiya AD7 Wheels. Also got Tein S-Techs, Rear Pillowballs and some rear toe bushings. Been busy so working on the car quite slowly.

Attachment 668129

Attachment 668130

Attachment 668131

Engine how it sits for now.

Attachment 668132

Nice score on the roller and good ups on the rebuild!

Whoever did the detail job on your car has got some skills

Yup he does. You should bring your car to him. He does a lot of exotics and he owns the black Porsche in above photos.

Nice build, that detail job is great, wish I know someone in Chicago that can do that for me.

Yeah he's the best. I thought my paint couldn't be saved. He made it possible. 4 stages, wash, buff, clay bar and wax.