Glad to see you are still at it. good luck with the re-rebuild;)
|
Originally Posted by muibubbles
(Post 10170150)
...today i just pulled the motor with the intentions to bring it to dave @ KDR to check it out and see if warenty work would be possible but as i took it out i saw some debris from my sand blasting and im assuming i fcked it up. soooooooo im going to tear it down and rebuild it myself...
So you're not smart enough to not fuck up your own engine during the simple act of sand blasting... yet you think you're capable of rebuilding it yourself... I'm actually LOL. I know you "love haters! z0mg" but seriously you're an idiot most of the time. I appreciate some of the work you've done to try and make the car nice during your build but most of the stuff you've done is half-assed and the only notable items are notable because of the ultimate fail associated with them. Let's face it, you don't have much money to put towards this car, which is why your progress is so slow with the build and also why you've decided to rebuild the motor yourself. While you may want to get it running again, I can promise you that rebuilding it yourself is a recipe for disaster. Take it to IRP and get it done properly. Sure it will cost more, but I promise it will be at a higher quality than you will be able to prodcue from your garage. Maybe you should just sell your tools all together if you actually did manage to kill your engine via a sandblaster. PS: I know it's tempting, but while the motor is apart I suggest you don't try and powdercoat the eccentric shaft pink. It might look mad tyte, but ultimately not a good idea. |
So you're not smart enough to not fuck up your own engine during the simple act of sand blasting... yet you think you're capable of rebuilding it yourself... I'm actually LOL. I know you "love haters! z0mg" but seriously you're an idiot most of the time. I appreciate some of the work you've done to try and make the car nice during your build but most of the stuff you've done is half-assed and the only notable items are notable because of the ultimate fail associated with them. Let's face it, you don't have much money to put towards this car, which is why your progress is so slow with the build and also why you've decided to rebuild the motor yourself. While you may want to get it running again, I can promise you that rebuilding it yourself is a recipe for disaster. PS: I know it's tempting, but while the motor is apart I suggest you don't try and powdercoat the eccentric shaft pink. It might look mad tyte, but ultimately not a good idea. |
^ everyone has to start somewhere. I'm all for attempting it yourself, you can even get a how to video (not that its the end all be all of course).
I think the best idea would be to see if a reputable builder would help you. Some obviously have there secrets, and may not want to tell you everything, but I'm sure there is someone on here that has some good experience and would be willing to help you for a few hours (it's not like you'd be asking for there "secret ways of porting"). This would be a great learning experience, and would also lower the risk of you messing it up yourself (this would be worth it even if you paid them a little). |
damn, someone is a negative nancy. cabaynes is it really so bad the way bubbles and countless others (myself included) are going about things? we love the car and we're doing what we can with it, just cuz we're not rolling in money doesn't mean we can't have and build these cars at our own pace. Also plenty of home-done rebuilds have lasted for years, what's so wrong with doing it that way?
fuck someone needs to get laid |
Originally Posted by KKMpunkrock2011
(Post 10170986)
fuck someone needs to get laid |
Originally Posted by Chudsoncoupe
(Post 10170976)
^ everyone has to start somewhere. I'm all for attempting it yourself, you can even get a how to video (not that its the end all be all of course).
I think the best idea would be to see if a reputable builder would help you. Some obviously have there secrets, and may not want to tell you everything, but I'm sure there is someone on here that has some good experience and would be willing to help you for a few hours (it's not like you'd be asking for there "secret ways of porting"). This would be a great learning experience, and would also lower the risk of you messing it up yourself (this would be worth it even if you paid them a little).
Originally Posted by KKMpunkrock2011
(Post 10170986)
damn, someone is a negative nancy. cabaynes is it really so bad the way bubbles and countless others (myself included) are going about things? we love the car and we're doing what we can with it, just cuz we're not rolling in money doesn't mean we can't have and build these cars at our own pace. Also plenty of home-done rebuilds have lasted for years, what's so wrong with doing it that way?
my biggest feud is how most people shoot down the idea of rebuilding engines... saying not to do it and what not... but ironically isnt one of the biggest hypes about a rotary engine that it is only 3 moving parts? and the simplicity of the motor? :scratch: |
Yeah, that point is often overlooked. Everyone and their brother tears down and puts piston engines back together. If you go to any other forum (piston related), there are tons of people that rebuild their own engines. A DIY rebuild should be just as common over here.
|
I agree, I know a few people that have rebuilt their motors and race them fairly frequently. They've also volunteered to help me with my first rebuild now that it was come time. I would much rather rebuild the motor with some buddies for the cost of a case of beer and some pizza and use the remaining funds for something like my new turbo (just ordered) or professional tuning.
|
sweet! what turbo? do u have a build thread? i was looking but couldnt find one?
|
nope, no build thread, precision 6265, billet wheel .70 a/r compressor 4 inch inlet, 2.5 inch outlet. 1.0 a/r divided turbine housing with a 3" v-band outlet
sean at a-spec hooked me up. 950 for the whole thing edit: I'll probably make a build thread when I get a break, 70 hour work week and classes starting monday = no time for me, the motor is almost out (I popped it in april and had to move at the end of may so I didn't really work on it that much) |
so somewhat of an update... as i opened my motor to fix the oil leak turns out my plates are fckedfdsunfo[ up.... so thats been on hold as im deciding what to do with it...
as of right now im rocking my friends back up/spare motor... cant really boost past 5 psi but it runs and will do for now. only other addition has been the feed side skirts... paint the skirts and re sprayed the 99 spec lip with sem trim paint will throw some pics up later courtesy to everyone who took pics at the carlisi meet |
you've got one hell of a good friend to let you use his motor haha.
|
lol yeah... along wiht his dump tube, water pump, intake filter engine hoiste, stand and rotary adapter ahhaha
but the engines not in great running condition lol........ |
Well, at least you made it to the Carlisi meet Benny :icon_tup:
I'll be at the meet tonite if you want to talk about those Series 8 irons and the engine build. |
so i think my alternator is crapping out again.. im not sure tho.. battery was toasted and just got a new one today... ive tried 2 used alternators, on both the car starts up fine, holds a steady 12volts but if the lights go on or music it drops to 11.6... i ahve no idea what it is... its def not the battery. i cant figure out if its the alternator or maybe a ground?... i ahvent touched any grounds since so idk why that would occur outta no where if it is a ground.....
help! gotta make it to one last meet for the year! rotary factory this next sunday! |
late reply, but i like the side steps being white.
|
Originally Posted by muibubbles
(Post 10223506)
so i think my alternator is crapping out again.. im not sure tho.. battery was toasted and just got a new one today... ive tried 2 used alternators, on both the car starts up fine, holds a steady 12volts but if the lights go on or music it drops to 11.6... i ahve no idea what it is... its def not the battery. i cant figure out if its the alternator or maybe a ground?... i ahvent touched any grounds since so idk why that would occur outta no where if it is a ground.....
help! gotta make it to one last meet for the year! rotary factory this next sunday! |
Pink shit ! Cool !!
|
Originally Posted by cabaynes
(Post 10170466)
i know it's tempting, but while the motor is apart i suggest you don't try and powdercoat the eccentric shaft pink. It might look mad tyte, but ultimately not a good idea.
|
Originally Posted by mefarri
(Post 10257149)
If you're checking the alternator while the engine's running, the battery should have over 14.3 volts and drop down and hold mid to high 12's once you've turned the car off.
but just for reference it wasnt the alternator it was the main fuse box, the connection to the main fuse was messed up bc the plastic around the fuse pins got melted?!?!?!?
Originally Posted by kensin
(Post 10257256)
Pink shit ! Cool !!
|
Originally Posted by muibubbles
(Post 10264114)
thanks for the help... with it off it reads low 12's, at idle like mid to high 12's when cruising acc, peaks at high 13's/low 14's... is that normal? i know last year when my car was running almost 100% it it held a solid like 13.5 or 14?? but i know it was high and stable vs now... even 12 feels low to me...
but just for reference it wasnt the alternator it was the main fuse box, the connection to the main fuse was messed up bc the plastic around the fuse pins got melted?!?!?!? hahah thanks:nod: |
will do, car does start at low mid 12's takes a few cranks to get her up but she starts... ahvent been really driving it since im having that tail light fuse keep blowing... im getting ready to take her apart... i gotta recheck all the wiring and redo it all to make the interior wiring pretty....
on the side note ive been playing with my vibrating tumbler and figured out how to get bolts shiny! im testing em it out with my old bolts but seems to be getting a nice shine on em... first stage- aluminum oxide sec stange- corn cob and compound next stage im gonna try corn cob and a finishing compound will post results shortly |
Pics neow!
|
looks good mate. goodluck with the engine rebuild. question when u painted the brake calipers with the gold writing did u do that just by hand with a brush or i heard u can do it by painting the gold before the black and rub off the black where the writing is with a rag and thinners when the black is still wet then you have your gold...
|
All times are GMT -5. The time now is 08:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands