93 RX7 R1 Build - Summer 2011
6 Attachment(s)
Thanks to a good summer and an very understanding wife, I finished my latest rebuild this summer. Enjoy the pictures.
|
6 Attachment(s)
More pictures
|
More pictures
|
5 Attachment(s)
more pictures
|
5 Attachment(s)
more pictures
|
5 Attachment(s)
even more pictures
|
6 Attachment(s)
Last set of photos. I hope you enjoy.
|
Great job
|
beautiful, any info on the engine set up, what did it put down to the ground?
|
Here are some of the highlights:
- large street port - 3mm Apex - Xcessive LIM - GTX4294R with Tial SS Turbine - ASpec fabricated exhaust manifold with dual Tial MV-Rs & 4” downpipe (thanks Mike aka Blackadde) - 4” SS exhaust with 4” Magnaflow & 5” Tip (thanks Steve aka Prew) - Ron Davis radiator - Apexi GTspec FMIC - RE-Amemiya headlamps with Air Induction (thanks Kai aka KaiFD3S) - ZEX Nitrous System with 200 shot (~3500-6000 rpm window) - AlcoholInjection Systems Meth system - Haltech E6K (old but reliable, on the upgrade list for 2012) - 3X MSD 6A Ignition - CJ MotorSports Dual Bosch 44 in-tank pumps - CJ MotorSports fuel rails - InjectorDynamics ID750 primary, ID2000 secondary - Endevour Engineering 38mm Gilmer - Garfinkle engine torque brace As you can see this forum has been a source of some great parts from as equally great people - thanks again all. My first visit on dyno with very conservative tune, 110 Turbo Blue, no nitrous or water/meth resulted in 430 whp / 340 lb-ft @ 18 psi. My boost target is 28 psi - so expecting to have more fun in 2012. |
Nice build
|
:icon_tup: Nice!
|
Lou, that is one sexy FD! I had no idea you were putting it into a CYM. I've been waiting far to long to see your build thread. haha There's no need to thank me, you really put together a great car! I'm looking forward to seeing more of your dyno numbers, and maybe a video or two. :beerchug:
|
6 Attachment(s)
Thanks for the feedback Mike. Here are a few more pictures. I'll post some videos soon.
|
4 Attachment(s)
Headlamps & intercooler
|
5 Attachment(s)
Trans brace, diff brace, engine brace, & 4" SS exhaust
|
Very nice!
|
5 Attachment(s)
Thanks all for the nice comments. Here's a few more build pictures. That's me sand blasting in the driveway. All work done in my garage. Also included a nice teaser picture.
|
5 Attachment(s)
A mix of work and pleasure.
|
6 Attachment(s)
My other stablemate. My father is the orginal owner of this '86 GLX. Just turned 25k miles. Everything is original and flawless, paint is still a mirror finish. I now keep it in storage and drive the vehicle less than 100 miles per summer.
|
6 Attachment(s)
A few more pictures of the pair.
|
6 Attachment(s)
Last set
|
Beautiful cars, your FD project is awesome.
|
|
very cool - intakes in the fog & the headlight? wow.
|
All times are GMT -5. The time now is 09:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands