1996 Type RS Build Thread
4 Attachment(s)
I thought I start a build thread on my 1996 JDM Type RS
When I got it from japan the car was pretty stock except , C-West bumper and side skirts , as well as Apexi intakes and a Blitz super access ECU. |
4 Attachment(s)
Next I fitted a locally made carbon fibre bonnet and my headlights that I imported from japan polished the UIM and Boost pipe and replaced all plastic with hard pipes . Also replaced the old apexi intakes with HKS RS intakes and also fitted a Blitz BOV
|
7 Attachment(s)
Fitted a Apexi RSM , Power Fc , refurbished the Rims , fitted Super pro bushings all arround .Sprayed all suspension links baby blue , as well as the calipers
|
Nice build, did you rattle can or powder coat the suspension, looks like it turned out good. I just powder coated my suspension a couple months ago and it's nice when it's all done.
|
My parts where San blasted and spray painted . The benefit is you can touch up with the exact same paint later when you use paint
|
3 Attachment(s)
So finally got the bumper and headlight covers painted . Contemplating if I should stay popup or install my static headlamps
|
The bumper and covers look way better painted! In my opinion the flip ups always looks better then the aftermarket flush mounts. I sold mine and went back to flip ups.
Only thing I am not a huge fan of is the wheels and side skirts. Nice build though! |
Also start to like the pop ups more , but the lenses are dull and the covers tabs are crappy so gonna go for the static lights for now . Also not crazy about the rims , I want to get TE37 but at the moment it's not a priority , just sprayed them white as the chrome is a bit too bling for my taste
|
Plus one for the pop ups if your taking a vote. If you want you can use a headlight restoring kit. I did that and it made a big difference I think I have before and after photos and it is night and day difference.
|
1 Attachment(s)
So statics are in gaps are horrible but will have to do for now , waiting for the exchange rate to get better and buy a set of R-Magic headlights
|
1 Attachment(s)
Getting there
|
1 Attachment(s)
Greddy type LS FMIC just arrived from Japan today ;)
|
did you change your front bumper? let me know if you'd like to let go of your cwest front bumper.
|
Yes I did change bumpers , I got the CWest bumper fixed in the meanwhile as it was making a gap on the left headlight . I actually want to fit it again ;)
|
5 Attachment(s)
Koyorad N-FLOW and Greddy Type LS FMIC installed
|
3 Attachment(s)
My Engine bay over the last 12 Months
|
1 Attachment(s)
It's been a while , but finally managed to sort out my sequential twins . After various swapped vaccum lines and leaking pressure tank and some faulty solenoids I can finally focus on the important things . Next is a dyno tune ( hopefully Friday) followed by a coilover upgrade . My coilovers where lying still at the post office due to a 4 months long strike . My last one should arrive tomorrow . Here a sneak peak of my Oehlins with HKS tops
|
Nice Markus good progress.
You taking your car to Dorne on Friday? If so please let me know what time I want to come meet you see your car :) |
Karel from Rotrix will help me tuning the Apexi. It's convenient as he is literally 500 m from my work . Just need to confirm if he got time this Friday after work .
|
1 Attachment(s)
Finally my last coilover arrived today ;) unfortunately the Dyno is not yet ready so I have to wait 2 weeks to tune her
|
3 Attachment(s)
Finally installed my coilovers yesterday ;)
|
It's just the too with the 3 studs that mount on the dome , I bought them second hand on auction like that
|
4 Attachment(s)
So , picked up some hot water labs bucket copies this morning and did a mock up on the car , looks way better than my old ones . Also mocked up my old c-west bumper to see what it looks like . Still need to cut a bit on the bumper to accommodate the FMIC and ten get everything sprayed , make brackets for the buckets and buy some lights for the buckets
|
New buckets look lekker! Best of the three options in my opinion. Keep up the good work.
|
1 Attachment(s)
Worked a bit on the bumper fitment today , hope I can finish all the prep work on the bumper and buckets this weekend , so I can get it to the panel beaters for spray on Monday .
|
All times are GMT -5. The time now is 10:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands