I just got my coolingmist vari cool kit installed and the controller seems to be injecting 5 to 7 psi early. I have the min **** set at 17psi just to get it to come on at 10psi on the boost gauge. If i put the min **** at 10 it injects when my boost gauge is reading 5psi, I know there can be a small difference between gauges and computer readings but this seems like alot to be off.
Is there anything that can be done to correct this?

 

install the software and connect to your laptop. Turn the min **** and look at the **** on the screen. It should match what the controller ***** say, if not, you can remove the green **** and align the **** with the number. Most likely that is your problem.

David

 

Thank you Ill try that and see what happens