I need some advice on how to setup boost control using the AEM. Do I have to buy the AEM solenoid???

 

You need a solenoid. I believe mine is the GM solenoid. You have to wire it into the harness however. Go to www.aempower.com and do a search. They have a lot more info.

 

There R a lots of brand that they use quite the same regulator , Perrin , Haltech , Aphexi, and there is a GM selenoid that can be used too. I think that know there is not available that information at the AEM web page cause they get they own selenoid with the AEM brand. But they all work the same.
I just both a Perrin one , for my AEM ($86)

 

yeah should cost no more than 100 and aem is the best.

 

I'm wating mi perrin boost presure regulator , and I will install it to my AEM ECU , I will let you know the details , and I will try to post some pics

 

Ok I instellad mine , first you have to conect the boost control as it apears in the instalation manual (cause there R diferent instalations , if you have an external weasgate , etc) , then , you have to conect one wire to swich + and the other to the PW2 on the AEM ECU , then you have to setup it in the boost control menu , you have to choose the Hz that the control works , in my case 31,3hz , if you get it wrong the control sounds , so you know when you R rigth cause it dosent sond , only when you turn the ingniton on, then you have to work on the boost map , that the part that Im working now so I can't tell you more cause I haven't finish that part, last nigth I work on it , but I have a blind spot on the boost map , and I have problem with the ingnition setup , so Im buying a pyrometer to solve it.