No spark 93 rx7 direct fire
 

I have the sakebomb kit. I'm not getting spark. It has power and it has ground. So it's with the signal wire. I've been told I will never be able to test the signal wire so what's the best way to track down this issue?

I mean, you can test the signal if you have a 'scope. I'm not sure if something like this would work with the appropriate adapter: https://itunes.apple.com/us/app/osci...388636804?mt=8, I haven't ever tried one of these. But also used ones are cheap on craigslist.

My adaptronic must be bad. No spark on any of the 4 coils. As soon as I swap to a factory ecu I have spark. I guess I'm just not meant to get this car running

Did you ever get this problem figured out? I am having the same issue with the same setup....

there is a thread for this gotta find it. Did you do the wiring for it? Both andy and the guys from turblown eng have posted. I'll find it and link it. For direct fire you have to make a modification.

here is one post.

https://www.rx7club.com/adaptronic-e...tings-1066512/

Thanks that helped a lot!

He had a broken wire in his harness.