Adaptronic Engine Mgmt - AUS Plug-in and wire-in stand alone ECU's for RX-7's

Adaptronic FD EFR 9174 map request

Thread Tools
 
Search this Thread
 
Old Jan 21, 2019 | 01:36 PM
  #1  
Net Seven's Avatar
Thread Starter
Rotary Enthusiast
Veteran: Army
Tenured Member: 20 Years
Liked
iTrader: (5)
 
Joined: Apr 2002
Posts: 1,470
Likes: 15
From: Mesa, AZ
FD EFR 9174 map request

Anyone with a good map for the single turbo street ported 13B REW willing to share? I just bought an FD that was tuned well for WOT and decent driveability, but doesnt have the idling refinements setup. After hot starting, it chokes because it's dumping too much fuel for about 20 seconds then clears up instantly.If anyone has a good map I can take a look at and see how you have yours setup with the refinement settings, I'd appreciate it.
Reply
Old Jan 22, 2019 | 10:43 PM
  #2  
Skeese's Avatar
Rocket Appliances
Tenured Member 05 Years
iTrader: (11)
 
Joined: Nov 2013
Posts: 1,134
Likes: 206
From: Canton GA
These are the type of features that you are really just going to have to play with to see what your engine and supporting fuel system likes the best. It sounds like you need to back of the cranking fuel at hotter temps, which isn't a surprise. I always found the amount of fuel the adaptronic base maps put in the cranking table was WAY overboard and continually flooded the car, especially in the hot conditions. If someone tuned your car for WOT and general driving conditions on the dyno, its very likely they didn't alter the smaller things like cranking fuel from what was in the base map...

Skeese
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
51
Nov 23, 2018 10:52 AM
Turblown
Single Turbo RX-7's
8
Jun 6, 2018 04:32 PM
Turblown
Single Turbo RX-7's
4
May 16, 2018 05:45 PM




All times are GMT -5. The time now is 12:14 AM.