wild boost problem
 

I am trying to figure out how to control the boost using the stock FD wastegate. I have no cats a full exhaust, emanage fuel controler and greddy intakeand the turbos have been converted to non sequentail I have no boost silaniods.


there are two nipples sticking out of the wastegate which one goes to what???

Chances are that if you have a dp, mp and something that flow better than the stock catback, you are over-running the stock wastegate.

You'll probably either need to port it or add some restrictor plates to the exhaust.

You might get some good info from this thread:
https://www.rx7club.com/forum/showth...threadid=26389

if I can get it below18 PSI I will be happy.