what size injectors should i get?
i want to upgrade my boost and i need a power fc, fuel pump and bigger injectors. what size injectors do i need? i was thinking the 1300cc ones. can i controll that with a power fc or do i need an apexi ems? im pretty new with my fd and it runs great. i already know bout getting cat bak, dp and intake and ish like dat. i want to get my car to 12-14lbs of boost. what do i need that i forgot bout? dont blast me either!
|
well the power fc is a stand alone... and the 1300 cc secondaries should be sufficiant for those boost levels
|
make sure you flow test the 1600cc ones if you do go with them! They seem to all be a bit off, sometimes by a lot...
|
If you want to run 12 psi daily:
*cat-back *downpipe *intake *upgraded intercooler *ecu or Power FC If you want to run 14 psi daily: *add 1300cc or 1600cc injectors *add higher flowing fuel pump The PowerFC can handle larger injectors. |
This is kinda fun to play with...A fuel calculator from Rotary Performance in Garland
Fuel Calculator |
if i get the 1300cc secondary injectors what about primary?
|
rp's calculator is way off....at least for me....im pushing 381 at 80 percent...almost a hundred less than they say via that calculator
stock primarys are fine if you are running 14lbs on stock turbos j |
Jason, 550/1300 at 80% yields 446 flywheel HP, which is about right for 380 RWHP.
Partially inspired by RP's page, I wrote a much more comprehensive one that some of you guys might find useful. This shit isn't rocket science, but it does take some knowledge to understand how it all works together. I have some links and explanatory text on my page that is intended to help you gather that knowledge: http://www.maxcooper.com/rx7/how-to/...tem/calcs.html -Max |
Originally posted by rynberg If you want to run 12 psi daily: *cat-back *downpipe *intake *upgraded intercooler *ecu or Power FC My goal is running 12psi daily with those above mods...and also a mild street port/ported wastegate. thanks! Edgardo ps. Plausible to add high flow cat into the mix as well without upgrading the fuel system? |
Okay i went to maxcooper's link, and i have a question:
Under "max duty cycle" it says the stock 93-95 RX-7 ECu tops out around 63% I then entered 550 primaries and 1300 for secondary, keeping the max duty cycly option at the stock ecu's max at 63%. with that setup its says i should be able to support 343Flywheel HP or 292RWHP Here is the question: Does that mean with stock ECU and larger 2ndary injectors, I should be good up to 292RWHP? (BTW i have the supra pump as well) thanks! |
you cant run different sized injectors with the stock ecu it doesnt know how to control them
|
get a pfc or the ems if you're planning on larger injectors.with a standalone you can run as much duty cycle as you want( up to 100%). i hear 80% is a good maximum number.
|
All times are GMT -5. The time now is 06:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands