RX7Club.com - Mazda RX7 Forum - Vacuum lines for aftermarket parts? help?

Hello, i am putting together a 94 rx7 that was torn apart when i got it, i was given all the parts but have had a few troubles finding where everything ends up. what it comes down to is i have 4 open vacuum lines and 4 open 'nipples' but dont know where each one goes.

pic1

pic2

pic3

pic4

pic5

pic6

in pic 1 there is the open nipple
pic 2 has 2 open nipples on the intake manifold
pic 3 shows 2 vacuum lines running through the firewall (there are 3 that go inside the car total that i dont know where they hook into) one is a straight line and the other has a splitter on it.
pic 4 is the BOV
pic 5 shows a manual boost controller
pic 6 is the turbo gauge (has a nipple on back)

in the end i have an open nipple on the back of turbo gauge, 2 on intake , one on BOV, an input and out on turbo boost controller, and last on the greddy pressure sensor.

i do not know where to look for a diagram but im sure many others havedelt with this and this is my first time working on an rx7 so i am clueless. i have tried to look many places for info but came across junk. any help would be tremendous,

thank you.

ps. its a miata converted to rx7 so the engine bay may be setup a little bit differently.