vac LEAK?!
So i have been noticing that my idle does this thing where its at 800 then dips to like 750 then back up. It does this kinda random its like a quick blip, so i was wondering if maybe it was a vac leak? So i go and pull one of the vac lines off the mani (the one the boost gauge is hooked to) and the idle goes to 850 and doesnt blip or anything, it just stays at about 850 perfect. I put it back in and then it goes to about 800 to 750 again. what does that mean? do i have a leak?
|
is it a autometer gauge? if it is the its probably leaking from the fitting behind the gauge, i removed the plastic/nylon hose from mine and installed a barb fitting and used a silicone vacuum hose to supply the gauge, haven't had any problems with it since.
|
ya it is an autometer but would that cause the little blip in the idle?
|
if you said that when you removed the gauge the problem was fixed then yes.
|
where did you get the barb fitting and the silicone hose from? thanks alot in advance man.
|
i got the barb fitting from the local hardware store i cant remember the size but all you have to do is take the gauge to the hardware store with you and find the fitting that fits and i got silicone hose from hosetechniques.com the size of hose you need is 3.5mm
|
All times are GMT -5. The time now is 08:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands