RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Turn signal stuck on (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/turn-signal-stuck-802083/)

silverTRD 11-22-08 04:38 PM

Turn signal stuck on
 
quick story. i rmoved my interior to change out the carpet which includes the dash and gauges and a/c panel and the whole bit. when i put it all back together the right turn signal is stuck on.

i wonder if i damaged the assembly at all when i removed the dash or cluster. the reason i say this is because the turn signal indicator feels very difficult to engage to the left turn signal. the left turn signal does not turn on even when engaged and the right is on reguardless.

i looked at all fuses including tns and it does indeed click when the lights are turned on to the first section. i also looked into shorts or cut wires and i cant find a thing. i cant find out what it is and its driving me crazy! i want to driive my car...

i searched and couldn't find what i was looking for. tia

tt7hvn 11-22-08 04:41 PM

look at the FSM wiring diagram for it and trace the circuit

IRPerformance 11-22-08 05:19 PM

The flasher relay is on the driver's side behind the kick panel. You might have disturbed it or unplugged something. Its the large black box.

1QWIK7 11-22-08 05:59 PM

Off topic but you didnt have to remove the dash to install the carpet.

I did my tan to black conversion without removing my dash.

silverTRD 11-22-08 05:59 PM

flasher relay is fine. or seems to be at least. connections are fine.

BOOSTscoop 11-22-08 06:01 PM

aftermarket steering wheel? did you remove your wheel? check the clockspring or w.e.

silverTRD 11-22-08 06:15 PM

it does have an aftermarket steering wheel so it has an aftermarket hub as well. isnt the clock spring for the stock wheel? and what is the w.e.? can you elaborate please? thanks

BOOSTscoop 11-22-08 06:20 PM

idk. my wheel isi kind of ghetto because i have a theft recovery. but theres a spring and a switch. know how when you turn your signal on and turn? and once your wheel comes back straight it flicks off? its possible that switch could not be catching. shouldnt be hard to look.

1QWIK7 11-22-08 06:26 PM


Originally Posted by silverTRD (Post 8742711)
it does have an aftermarket steering wheel so it has an aftermarket hub as well. isnt the clock spring for the stock wheel? and what is the w.e.? can you elaborate please? thanks

w.e means whatever lol

BOOSTscoop 11-22-08 06:31 PM

yea bitch! WHATEVER... i had a sweet rant when I was drunk here... h.o.. itll make everyone happy

BOOSTscoop 11-22-08 06:31 PM

mso drunk.I jsut slammed half a half gallon on captian and 3 sots of hypnttiq..../ girls arer the devel. ps. rx7 club. i klove you no matter what. my fd us the onley on one to ever be true and hinest to me/ talk about wife potential. fd3s FTW. I wana rebuild my DFD. my car si the only thing that I can honestky say ,akes me happyl.] I wish coukd marry it and be happy forever

silverTRD 11-22-08 07:23 PM

until it blows. lol hope i didn't jynx you

BOOSTscoop 11-22-08 08:38 PM

its blown already!

silverTRD 11-23-08 01:35 AM

if anyone has any other ideas that would be great.

BOOSTscoop 11-23-08 01:41 AM

did you try the wheel

IRPerformance 11-23-08 11:48 AM

The dash does have to come out or at least be lifted up to remove the carpet without damaging it. The carpet goes around the middle of the dash behind where the climate controls and radio is. Further, Mazda used some sort of adhesive to hold it. I have changed about 5 of them an unless you cut the carpet, I always pull the dash.

silverTRD 11-23-08 11:52 AM

^exactly^

i didnt want to hack up my new carpet:)

1QWIK7 11-23-08 11:59 AM

Idk, my carpet came already "pre-cut" like someone did the work for me.

Another reason why it worked out well for me, because i didnt want to encounter problems like in this thread lol

silverTRD 11-23-08 12:46 PM

i turned the wheel from lock to lock twice. it fixed the difficult engagement of the indicator switch but the right signal is still stuck on.??????

BOOSTscoop 11-23-08 05:04 PM

try unhooking the battery for 15 minutes (resetting the computer) check the wiring going to the light. a lot of times just the dirt and debris from the road can cause bad connections in the wiring plugs and stuff. might just be a short.

silverTRD 11-23-08 06:45 PM

i have a circuit breaker on the car so its been off overnight. i'm gonna check the wiring on the flasher more closely. if thats good, i might swap out the flasher with a friend to check.

is it posible i tweaked something on the switch and not realized? it looks so simple it would be unlikely...

BOOSTscoop 11-23-08 06:52 PM

IMO the turn signal seems somewhat cheaply made. my wheel comes close to it and sometimes when I turn I bust my knuckles on it and it feels like its about to just snap off. is it actually clicking and displaying on your dash? or the light is just stuck flashing?

silverTRD 11-23-08 06:53 PM

both. clicking and flashing.

BOOSTscoop 11-23-08 07:28 PM

check... under your column cover

BOOSTscoop 11-23-08 07:50 PM

talk to ihor, hes pretty cool. he doesnt seem to get too angry when I randomly text him with a stupid question. hahaha


All times are GMT -5. The time now is 12:59 AM.


© 2024 MH Sub I, LLC dba Internet Brands