turbo timer install
Passenger
Posts: n/a
turbo timer install
Hey guys,
My friend and I are going to be installing a blitz full auto turbo timer on his 3rd gen tommorow. I need a wiring diagram or info to determine which wire goes to the ecu, and which wire it splices into. Also, which wire goes to the parking brake. And finally, do any of the other wires other than the main harness have to be connected for this application? This is the full auto FATT, not the dual timer that does everything automatically. Thanks in advance for the info, the damn instructions are in japanese.
Darrell P
ACRoss1295@aol.com
My friend and I are going to be installing a blitz full auto turbo timer on his 3rd gen tommorow. I need a wiring diagram or info to determine which wire goes to the ecu, and which wire it splices into. Also, which wire goes to the parking brake. And finally, do any of the other wires other than the main harness have to be connected for this application? This is the full auto FATT, not the dual timer that does everything automatically. Thanks in advance for the info, the damn instructions are in japanese.
Darrell P
ACRoss1295@aol.com
Full Member
Joined: Jul 2001
Posts: 174
Likes: 0
From: Vancouver, BC, Canada
The wiring diagrams are here:
http://www.iluvmyrx7.com../Technical...ice_manual.htm
And some usefull tips are here:
http://www.rx7turboturbo.com/robrobi...turbotimer.htm
Hope this helps.
AdamP
http://www.iluvmyrx7.com../Technical...ice_manual.htm
And some usefull tips are here:
http://www.rx7turboturbo.com/robrobi...turbotimer.htm
Hope this helps.
AdamP
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM