turbo simplification pics
I removed the airpump (installed a midpipe) and though id do the simplification while i was in there:
Here is one of rx7store.net's block off plates: http://www.myrx7.com/images/acv_blockoff.jpg I used the bottom part of the old solenoid rail as the foundation for the solenoid remaining after the simplification. http://www.myrx7.com/images/so_rail1.jpg I have the stock fuel system so i kept the fpr solenoid, here is apic of it part way though the rerouting: http://www.myrx7.com/images/so_rail2.jpg |
You used silicone tubing for a coolant hose? Unorthodox.
|
hey jonski, ...by the way thanks for all ur great posts on the simplification, those helped me a great deal, especially on the fpr deal...
silicone is fine for coolant from my limited understanding, it is a no-no for oil and gas.... i run evens at zero pressure so the only issue is heat, at silicone easliy takes the heat level of the coolant. am i wrong? heck, my radiator hoses are silicone :-) http://www.myrx7.com/images/therma1.jpg http://www.myrx7.com/images/therma2.jpg http://www.myrx7.com/images/therma3.jpg http://www.myrx7.com/images/therma4.jpg http://www.myrx7.com/images/therma5.jpg |
Where did you get the resistors for the solenoid plugs? Or do you have PFC in that car, (can't remember between the 2 you have.) I tried radio shack and they looked at me like I was from space!! " I've never seen a resistor that rating" BTW: Looks better with the pressure tank under the UIM. Aybody had any issues with the tank do to the heat it is now exposed to?( I.E. : cracking or melting?)
|
hey bigisland7,
i have the pfc in both cars so no resistors needed...all worked great so far :-) |
let me g'ahead and rate this thread too ;)
GOOD WORK. I like emissions, and like to say I'm close to 400bhp while passing :D |
Originally posted by dubulup let me g'ahead and rate this thread too ;) GOOD WORK. I like emissions, and like to say I'm close to 400bhp while passing :D dam 400hp, nice :-) |
Where did you get the silicone radiator hoses?
|
Just one question... why yellow?!? :D
|
hehehe Jim,..... yellow is cool!!!
on any other color I would not use yellow, but it contrasts with the MB very well, and im kinda artsy fartsy so i like it. |
Originally posted by damian on any other color I would not use yellow, but it contrasts with the MB very well, and im kinda artsy fartsy so i like it. |
hehehe :-)
|
Actually, I trust Damians artistic talent, if he can make those awesome videos, he can tell what colo fits his car best. Kudos Damian!
|
thanks :-)
|
I was wondering u know that vac line going no where on the simplification diagram i'm curious where it goes to? in the simplification diagram it looks it should go to the lim where it has those 4 nipples are. How did you hook the pressure chamber up?
|
i left the the pressure chamber hooked to where it gets pressure in stock form, down by the y pipe area.
what hose goes nowhere on the diagram? |
damian where did you get those checkvalves and the inline splitter with 3 nipples?
|
inline splitter with 3 nipples got from a local napa autoparts store, the checkvalves are from mcmaster car, here is my thread on it:
https://www.rx7club.com/showthread.p...t=check+valves |
Which simplification did you do the one on the Rob Robinette's site?
|
if you look on the simplification diagram there is one hose coming off the ypipe that's going no where
|
nm nm i understand now haha foolish me, I'm guess one of the sets of 4 nipples on the LIM (goes right through it) gets plugged off because the elimination of the EGR?
|
Originally posted by HobbeZ if you look on the simplification diagram there is one hose coming off the ypipe that's going no where |
Originally posted by HobbeZ nm nm i understand now haha foolish me, I'm guess one of the sets of 4 nipples on the LIM (goes right through it) gets plugged off because the elimination of the EGR? |
Very very good damian! I want to do the non-seq simplification myself. I give you mad props for doing it yourself with great info back to us. I just don't have the time, spec, or real tools do really do this myself. Someday I will be able to do anything on my car myself :p: Again, thanks for all the great info and pics damian! :D
|
thanks rx7spiritR
|
All times are GMT -5. The time now is 06:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands