Trying to look for replacement bumper and wing can anyone help identify brand?
|
|
The wing looks like Racing Beat Type 2.
|
Is there an inprint on the underneath of the wing? Looks like Mazdasppeed, or a Mazdaspeed replica.
Replicas run about $400; Originals $2000 on Yahoo Japan. But watch out for shipping costs. |
Haven't ripped it off yet mostly looking for side card inserts for it the ones on it are beat!!
Originally Posted by Redbul
(Post 12518540)
Is there an inprint on the underneath of the wing? Looks like Mazdasppeed, or a Mazdaspeed replica.
Replicas run about $400; Originals $2000 on Yahoo Japan. But watch out for shipping costs. |
I meant the underside of the blade. You could feel the indents if there is an identifying mark.
Here is an example of a replica. https://buyee.jp/item/yahoo/auction/...uggest_history Buyee will kill you on the shipping. You might try Jesse Streeter Corporation. He might help. |
|
|
All three of these examples have been rolling over on Buyee for months. I suspect the shipping costs are deterring buyers.
|
I have seen just the replacement screw covers on Buyee.
|
Yeah really trying to find exact same one with bolt pattern so I don't need to drill more holes smh. And wing cards don't have screw in cards they are like double sided tape. I feel like it's gotta be a rep.
Originally Posted by Redbul
(Post 12518548)
I have seen just the replacement screw covers on Buyee.
|
Any ideas of what front bumper?
Originally Posted by Redbul
(Post 12518548)
I have seen just the replacement screw covers on Buyee.
|
There are a number of replica bumper makers in California. Maybe start there.
Here is an example a friend just installed. A little more updated look. Came up by Greyhound from California. https://cimg1.ibsrv.net/gimg/www.rx7...0a6cbf836.jpeg https://cimg9.ibsrv.net/gimg/www.rx7...37a6e1f75.jpeg |
Originally Posted by Redbul
(Post 12518548)
I have seen just the replacement screw covers on Buyee.
Originally Posted by Redbul
(Post 12518552)
There are a number of replica bumper makers in California. Maybe start there.
Here is an example a friend just installed. A little more updated look. Came up by Greyhound from California. https://cimg1.ibsrv.net/gimg/www.rx7...0a6cbf836.jpeg https://cimg9.ibsrv.net/gimg/www.rx7...37a6e1f75.jpeg |
Almost looks like a Panspeed. Sometimes the replica makers will change somewhat. I am trying to think of the California replica maker. Something like Vesero?
https://cimg9.ibsrv.net/gimg/www.rx7...298428e6b9.jpg https://cimg6.ibsrv.net/gimg/www.rx7...c9441b3612.jpg |
|
|
I stand corrected. The Racing beat Type 2 and Mazdaspeed are almost identical except the Mazdaspeed one has adjustment screws under that paned on the ends. No such adjustment screws or panel for the RB wing.
also, that front looks like Burnout to me. Probably from Shine Auto Project. https://www.rx7club.com/interior-ext.../#&gid=1&pid=6 |
|
That remined me local kid smacked up his burnout kit. I think replacement bumper was about $450. But he had to switch to S6 stock due to insurance limits.
https://cimg3.ibsrv.net/gimg/www.rx7...4de98d97b.jpeg |
My brother-in-law' car has something similar. We have not figured out the maker for his car either. His car came like that from Japan in 2015.
https://cimg7.ibsrv.net/gimg/www.rx7...49c0c961ff.jpg |
Originally Posted by Redbul
(Post 12518646)
My brother-in-law' car has something similar. We have not figured out the maker for his car either. His car came like that from Japan in 2015.
https://cimg7.ibsrv.net/gimg/www.rx7...49c0c961ff.jpg |
Originally Posted by Dwilliams86
(Post 12518651)
Thank you guys definitely looks like it's probably the burn-out appreciate you guys!!
https://cimg9.ibsrv.net/gimg/www.rx7...9ef6adf02b.jpg https://cimg8.ibsrv.net/gimg/www.rx7...55eff795dd.jpg Info on the car: 1994 Mazda RX-7 - 7th Heaven (motortrend.com)
Originally Posted by from the article
The Vertex front bumper beautifully complements the OEM lines of the front end
vertex bumper with canards: https://cimg1.ibsrv.net/gimg/www.rx7...cf08d4115a.jpg Vertex Front Bumper Mazda RX-7 93-02 | VER-FD3S-FB (vividracing.com) Vis V-speed front bumper REPLICA (from what I hear the replica needs lots of body work to make it fit right): https://cimg7.ibsrv.net/gimg/www.rx7...17cbc62c59.jpg [For Sale] 94 Grand Prix White RX7 - RX7Club.com - Mazda RX7 Forum For anyone that is interested, here are the differences between the Racing beat and MS wing:
Originally Posted by T.Seuf
(Post 12182892)
I have had both. Still have what I believe to be an authentic MS wing.
Racing beat wing type II (never installed-dry fit only) - slightly beefier blade - 2 angle adjustments - 2 tamperproof Allen screws to retain endcaps. - 3 holes drilled direct into fibreglass on each side for mounting. On mine, they didn't line up perfectly to the stock 99 holes. - 95% true to shape and design of MS - slight gapping on leading edge (nearest the hatch glass), fitment would be 9/10 on a dark colour such as black. - Brand markings clearly imprinted on wing MS Wing. - Fitment near perfect. Slightly smaller blade - fixed angle - encaps have no screws, only double sided tape - 2 holes with backmounted nuts welded to flat iron for mounting. Recessed design to hide mounting tape. - holes appear to match stock 99 spec holes. (They are located centre of the indents underside edges of the hatch. Fitment looks spot on and very minimal gapping even on light colour such as silver. Side note... would be very interested to see an Odula blade customized to fit a MS wing. |
Regarding those end plates for the wing. If you have damaged examples, maybe seek out a local 3D printer operator to have them scanned and printed.
|
|
|
Originally Posted by Redbul
(Post 12518646)
My brother-in-law' car has something similar. We have not figured out the maker for his car either. His car came like that from Japan in 2015.
https://cimg7.ibsrv.net/gimg/www.rx7...49c0c961ff.jpg M sports kit: https://cimg3.ibsrv.net/gimg/www.rx7...ff8d955972.jpg
Originally Posted by from article
...but it's the M-Sport Japan complete aero kit that defines the car's look.
https://cimg9.ibsrv.net/gimg/www.rx7...1aa47b340e.png M Sports Full Body Kit (93-02 RX7) - Faction Motorsports Origin fenders: https://cimg2.ibsrv.net/gimg/www.rx7...92f81cf06d.jpg https://cimg4.ibsrv.net/gimg/www.rx7...22bad95f2d.jpg Note that at first glance the Origin front bumper looks similar to the M Sports but if you stare at the details the differences become quite apparent. Pic Request: Origin Wide Body Fd - RX7Club.com - Mazda RX7 Forum Feed intake duct: https://cimg8.ibsrv.net/gimg/www.rx7...02a2270beb.jpg FEED Afflux Aero Intake Light Cover - FD3S 13B - RHDJapan The hood is a strange one. It looks a lot like the knightsports vented hood. Except that on the knightsport, the main vents are inset and it also has additional vents by the firewall. https://cimg8.ibsrv.net/gimg/www.rx7...10f4b8c7fb.jpg The closest match that I can see is David Haye's custom vented OEM hood:
Originally Posted by David Hayes
(Post 11046438)
As requested. pics of the modified stock hood. The hood retains its stock brace pieces.
https://www.rx7club.com/attachment.p...1&d=1333804817 https://www.rx7club.com/attachment.p...1&d=1333804817 https://www.rx7club.com/attachment.p...1&d=1333804817 https://www.rx7club.com/attachment.p...1&d=1333804817 No water issues and every now and then I hose down and clean the engine bay. |
Methinks you have a strong interest in kits.
That is terrific info. Thanks so much. Interesting that the rear fenders are overfenders, in that the bodywork on the car is extremely smooth, like ceramic. It would be interesting to know which shop in Japan actually did the work. The engine bay is old school tuner special, as well. |
Originally Posted by Redbul
(Post 12518850)
Methinks you have a strong interest in kits.
Originally Posted by Redbul
(Post 12518850)
That is terrific info. Thanks so much.
|
I will make an enquiry.
https://cimg8.ibsrv.net/gimg/www.rx7...94c0a5e1d.jpeg 1500 pages of JDM goodness. |
:icon_tup:
|
Here is another view of the hood. Is that a makers mark in the lower left corner?https://cimg8.ibsrv.net/gimg/www.rx7...9518cb79a2.jpg
https://cimg9.ibsrv.net/gimg/www.rx7...f02107fbf4.jpg https://cimg7.ibsrv.net/gimg/www.rx7...02e7d7d947.jpg https://cimg1.ibsrv.net/gimg/www.rx7...8f734cf150.jpg Do I see white Mazdaspeed Gauges? |
|
|
|
|
Originally Posted by Redbul
(Post 12518968)
Here is another view of the hood. Is that a makers mark in the lower left corner?https://cimg8.ibsrv.net/gimg/www.rx7...9518cb79a2.jpg
https://cimg0.ibsrv.net/gimg/www.rx7...220255b4eb.jpg |
Food for thought.
Looks like a fairly large underpiece was attached. |
I dunno. Look at that hood again. I feel like they wouldn't do the sculpting like that to a stock hood for such simple vents.
|
Originally Posted by madhat1111
(Post 12519381)
I dunno. Look at that hood again. I feel like they wouldn't do the sculpting like that to a stock hood for such simple vents.
https://cimg5.ibsrv.net/gimg/www.rx7...3f2175f071.jpg
Originally Posted by Redbul
(Post 12519094)
Food for thought.
Looks like a fairly large underpiece was attached. |
I have not been granted access. The car is in storage somewhere. He is not inclined to go take a look.
End of story for now. Shigataganai! |
What's Next
|
Another Mystery Kit
New owner said mods were done at least 10 years ago and the car has been in storage ever since. He does not know the maker of the kit.
What's your guess? Front bumper, with lip, is a single piece. https://cimg4.ibsrv.net/gimg/www.rx7...847a068356.jpg https://cimg5.ibsrv.net/gimg/www.rx7...83fe75720c.jpg |
|
Originally Posted by Redbul
(Post 12520131)
New owner said mods were done at least 10 years ago and the car has been in storage ever since. He does not know the maker of the kit.
What's your guess? Front bumper, with lip, is a single piece. https://cimg7.ibsrv.net/gimg/www.rx7...9a07c03f09.jpg Eurou - Aero Kit - Mazda FD3S (FD3S) - Nengun Performance |
Originally Posted by Redbul
(Post 12519637)
https://cimg5.ibsrv.net/gimg/www.rx7...4b6c326f1b.jpg What front fender is on this car (FD3S)? - RX7Club.com - Mazda RX7 Forum The side skirts are Mazdaspeed from their GTC kit https://cimg7.ibsrv.net/gimg/www.rx7...c140c3d809.jpg https://cimg4.ibsrv.net/gimg/www.rx7...98e836112c.jpg Car Feature>> D Cups Mazda - Speedhunters Wing? could be anything :dunno: |
All times are GMT -5. The time now is 01:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands