3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

tranny problem

Thread Tools
 
Search this Thread
 
Old Sep 7, 2005 | 02:49 AM
  #1  
RiON's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 248
Likes: 0
From: california
tranny problem

Okay my tranny pops out of 1st gear and i did a search all the tranny problems guys had problems with all gears mine only pops out of 1st but the rest of the gears work just fine. Could it be cause low of tranny fluid?
Reply
Old Sep 7, 2005 | 07:30 AM
  #2  
dgeesaman's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
iTrader: (8)
 
Joined: May 2002
Posts: 12,313
Likes: 27
From: Hershey PA
Not likely to be the fluid, but drain/replace is rarely a bad idea.

Another thing to consider is bad engine or diff mounts. Does your shifter handle move around at all?

The rest of the common culprits are inside the transmission - shift fork, detente spring/ball, clutch hub/sleeve, gear wear, etc. Fixing those means tranny rebuild.

Dave
Reply
Old Sep 7, 2005 | 04:18 PM
  #3  
RiON's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 248
Likes: 0
From: california
yes the busing is shot
the handle moves around alot
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 10:38 AM.