throttle problem
 

Hi, I have a '93 jdm fd3s and since the beggining had some boost / power issues..

I had to get the 2nd turbo replaced and some uni-direccional valves but the car isn't running like it should yet..

I noticed this on the throttlebody and asked a friend to see how his was placed..
he showed me a picture and mechanism (I don't know how to call it) isn't placed like mine..

here's mine:
http://img61.imageshack.us/img61/8103/dsc00657ad0.jpg

here's the correct:
http://img507.imageshack.us/img507/189/rx7006gu7.jpg

the question is: how do I place it correctly.. it seems stuck to that position :|
I think that it isn't opening all the three throttle valves..

thanks,

Pedro.

Any better first picture that include the cable bracket? Though I don't know if the positioning matters there as much as the result at the butterfies.

Do you have a shop manual to go over the adjustment?

why all the screws and bolts in your vaccum lines?