Throttle Position Sensor
I broke the connection to my TPS during the Vacuum Hose job and am going to order a new one.
How do you set it in the Throttle body? I've talked with someone already and he said the two prongs that stick out on the TB itself have to be pushed into the plastic connector. Then the sensor has to be adjusted after you have it on by keeping the screws loose. Is there a procedure in the factory manual that I am missing? How do you get it on without messing anything up? |
Once you inscrew it you mess up the settings and have to calibrate it
|
BS --You do not press it in to the anything.. Easy it just sets beside the two flats that rotate it . It returns on its own spring, just look for your self . If you press it to the metal you will break a $150 part. This is not hard to look at and reason out.
|
look at this thread for a link on how to adjust the TPS:
https://www.rx7club.com/forum/showth...hreadid=170731 |
All times are GMT -5. The time now is 08:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands