Thinking of getting an RX-7... mod list...
1993 Mazda RX-7, Automatic, Black Interior
C-West Headlight Kit Scoot Vented Hood Momo Street Racer Seats, Black/Black Momo Seat Brackets Engine Rebuild if Needed HKS Stabilizer Bars HKS Super Mega Flow Intake Cusco Non-Adjustable Upper Strut Bearing Cusco Carbon Fiber Rear Strut Bar Cusco D-Shape Front Strut Bar Cusco Oil Catch Tank Racing Beat Front Sway Bar Racing Beat Rear Sway Bar M2 Competition Trailing Arms 17x8 Mille Miglia Evo5 Wheels 235/45YR17 Michelin Pilot Sport A/S Tires KAAZ 1.5 LSD Pettit Aluminum Air Separator Tank M2 Expansion Tank Bypass Kit M2 Battery Relocation Kit Greddy 1.3 Bar Radiator Cap Fluidyne Radiator RX-7 Store Stage 5 Upgrade Kit Autometer Dual Gauge Pods Blitz BL 52mm Boost Gauge Blitz BL 52mm Temp. Gauge HKS Twin Power Ignition HKS Twin Power Ignition Harness J&S Knock Retard System with Boost Map Sensor and Dual Monitor NGK Spark Plug Wires NGK Platinum Spark Plug Set Greddy 3-Piece Intercooler Pipe Kit Efini Y-Pipe Blitz SBC-iD Boost Controller Blitz Dual Turbo Timer Mazdaspeed PowerPlant Frame SR Motorsports Power FC and Commander RE Amemiya AD Mirror Type-R Cusco 4-Point Roll Cage Sparco Clubman Black 4-Point Bolt-In Harnesses RX7.com Carbon Fiber Driveshaft RX7.com Bearing Kit RX7.com Ultra Lightweight Chromoly Flywheel RX7.com Stage 1 Cross-Drilled Rotors Brake Upgrade RX7.com RP High Flow Throttle Body RX7.com RP Chromoly 300M Axles RX7.com 3mm Apex Seal Rotor Clearancing RX7.com '99 Spec Round Tail Lights RX7.com Front and Rear Mazda "Flying Bird" Logo Badges RX7.com RP FD Secondary Rail and 1600cc Injector Kit with SX Regulator and Pump RX7.com RP Air:Fuel Analyzer RX7.com 4.30 Final Drive Ring and Pinion Set RX7.com '99 Spec Front Spoiler Assembly (Spoiler, Lights, and Re-Bar) RX7.com '99 Spec Fog Lights RX7.com RE Amemiya Rear Wing Type-3 RX7.com RE Amemiya Rear Finisher Cover Mazdamatrix.com 13B 3mm Ceramic Seals Level Ten PTS Kit Mazda Level Ten PTS Hydrosystem Mazda Level Ten PTS Torque Converter Mazda Xtreme Motorsports A&A Frame Savers for C5/Z06 Tint - 70% Sides and Rear A/C Unit Replaced with More Current Unit Custom Prep, Bolting, Fabrication, and Welding of Parts for Frame Saver Installation Custom Dual Catback Exhaust with 3" Chrome Tips Custom Electron Metallic Blue Paint Job Custom Blue Painted Interior Accents Custom Sound System Now, my question to you guys/gals is: Is there anything I'm missing, anything that won't work with anything else on that list, or anything that I should add? I plan on getting an RX-7 within the next couple of months and I like to be prepared... as you can tell. :D Thanks, in advance, for any help. |
share the wealth!! :D
|
lol :p:
|
its hard to read all that and keep it clear but why not go with a single turbo and fmic? (obviously you have the money to so go ahead ;))
|
do you realize how much this will cost you?
|
Of course I realize, lol. It's not as if I'm going to get this all at once, I just want to be prepared and have a set list of mods to go off of. Although, just so you know I'm not full of ish, I have worked it all out. It'll cost me about (including the car) $70k-$75k. That's not including shipping and labor/installing of course. :D I'm just tryin' to see if there's anything I may be missing on that list or anything of that sort. Anyway, thanks for the responses so far.
|
Oh, ttpowerd, a single turbo and fmic are all included in the RX-7 Store Stage 5 Upgrade. :D
|
All this on an automatic?
|
Yep, a rebuilt/upgraded Automatic. Level Ten's upgrade kit says it's good for 750 hp / 650 tq, and then more if you use their hydrosystem and torque converter... Not sure if that's true or not, but I guess we'll find out soon enough? lol
|
Well while your spending that money i would just do a 5 speed swap. 70-75k seems a little high for all of that tough..
You plan on making this a show car?? |
Re: Thinking of getting an RX-7... mod list...
Originally posted by evopanop 1993 Mazda RX-7, Automatic, Black Interior |
Yes, I do. My friend and I are planning on getting the same exact car, and then we're gonna use them as show cars. Well, for me at least, I'm gonna drive the car on weekends too. :D
|
Mahjik, see my post about 2 or 3 posts up.
|
Originally posted by evopanop Mahjik, see my post about 2 or 3 posts up. Originally posted by unixpilot There are very few ECU upgrades availble for the auto FD, or at least ones that allow you to keep the "Hold" feature, which most auto owners would die without. Here is the breakdown of ECU's: Wont work: Pettit, M2, and basically any other that reprograms the stock ECU Will work but loose "Hold": PowerFC, Haltech, Wolf Piggyback systems: EFI/PFS PMC, Apexi SAFC, basically anyother piggyback fuel system. The best bet for Auto owners is the new AEM EMS, but it is still unavailable and unproven. Hope this helps. |
Originally posted by evopanop Oh, ttpowerd, a single turbo and fmic are all included in the RX-7 Store Stage 5 Upgrade. :D |
Re: Thinking of getting an RX-7... mod list...
Originally posted by evopanop Engine Rebuild if Needed RX7.com 3mm Apex Seal Rotor Clearancing |
https://www.rx7club.com/forum/showth...threadid=67833
look at that thread about 2mm seals vs 3mm seals. |
also, don't need a pettit ast if you get the m2 by pass kit
|
Originally posted by ttpowerd also, don't need a pettit ast if you get the m2 by pass kit I'm sorry, I don't see any of this happening... This looks like someone daydreaming and just decided to type it up... |
Thanks ttpowerd and everyone else... I don't really know much about FDs, so this is a learning process for me... I'll make sure to correct that stuff.
|
I hope not because this car would be schweet (aside from the auto) but you just got to learn alittle b4 you jump in head first.
|
That's ok Mahjik, I never said you had to believe me. I'm merely trying to get a feel for what I can and can't do to the car, and I'm trying to get a list together of what I plan on doing to it. Why am I daydreaming? Because the list is so long? I never said I'd be doing all of this stuff at the same time. I'm not a complete madman, lol. Thanks for all the help from everyone so far, though. Keep the comments, ideas, etc. coming. :)
|
Originally posted by evopanop That's ok Mahjik, I never said you had to believe me. I'm merely trying to get a feel for what I can and can't do to the car, and I'm trying to get a list together of what I plan on doing to it. Why am I daydreaming? Because the list is so long? I never said I'd be doing all of this stuff at the same time. I'm not a complete madman, lol. Thanks for all the help from everyone so far, though. Keep the comments, ideas, etc. coming. :) It's not like modifying some piston engine. But, looking at your profile, you have a Firebird yet you are posting a mod list that will cost the amount of 4+ Firebirds. Spend some time read some of the information sites: http://www.scuderiaciriani.com/rx7/ |
Mahjik, I do realize that. That's the same way on all message boards. I never said you had to believe me, I'm just trying to get advice. Thanks for the link though. :)
|
Oh, and regarding the Firebird comment. So? My firebird cost me $20k. A '93 Automatic FD'll cost me about $15k at most. Like I said before, I'm *not* doing all of this stuff at once, I'll be doing it over time. The reason I'm wanting an FD is, not so it can become my daily driver, but I'd like to have a nice car for the weekends, taking to car shows, etc. I'll still be keeping the Firebird as my daily driver. Pretty much all I've done to my Firebird is adding a FlowMaster dual exhaust setup. I don't plan on adding anything more to it. Well, enough of my ramblings... lol.
|
All times are GMT -5. The time now is 07:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands