RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   are there hard pipes that work with m2 style intake (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/there-hard-pipes-work-m2-style-intake-853488/)

matty 07-23-09 06:52 PM

are there hard pipes that work with m2 style intake
 
as the title states .....does anyone sell hard pipes that will work with the m2 cool air intake or similar?

Mahjik 07-23-09 07:02 PM

1 Attachment(s)
I used the cheap Bomez eBay kit, but only used the pipe for the secondary inlet. You can cut the first one to fit, but it seemed to be more effort than it was worth for me:

matty 07-23-09 07:14 PM

i will check them out. tks

phinsn98 07-23-09 07:36 PM

M2 made a set of hardpipes as an option for the intake but I'm not sure if anyone still makes them.

prrex4ever 07-23-09 09:57 PM

The hard pipes from rx7store.net are very similiar.

Captain_Panic 07-23-09 10:21 PM

Matty, let us know if you find a set and if there is any cutting you had to do to make it fit. I too have an M2 intake, and I would like a nice set of hard pipes as well.

theorie 07-23-09 10:34 PM

the M2 hard pipes work...lol

the ebay ones work as well. you might want to cut a little bit off the one for the front turbo to make the install easier.

currently i'm using an M2 hardpipe for the front turbo, and a bomez (ebay) hardpipe for the rear turbo. can't really see the m2 pipe but here's how it looks:

http://memimage.cardomain.com/ride_i...0277_large.jpg

matty 07-25-09 07:58 PM

theorie nice power for the twins. how long have u been running 15psi? i run 15 too going on 6-7 yrs now. alot of people say i am lucky.

i made 360 at 14-14.5 psi with 10.8 afr on the stock twins and engine. on the street though i run 15-16. the car runs great traping 118-120.

theorie 07-25-09 08:14 PM

ah well on the street i keep the boost down..closer to .85 bar (12-13psi). i really push it for the dyno.

my twins are pretty frankenstein. i couldn't believe they made 380. :) when i bought the car the front turbo was on it's way out. i bought a set off of a forum member that also had a bad rear turbo. once i got them i swapped his rear chra for my front one, also ported the manifolds. a few weeks later when i pulled the whole motor i decided to make the twins 'rich mans' non-seq. as of recently my front turbo is just starting to leak oil so i think i'm coming to the crossroads (again) - going single or repairing the twins again. pretty sure i'll just go single this time though...

6-7 years. you are lucky!


All times are GMT -5. The time now is 08:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands