RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   T04E Turbine, How much horse power? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/t04e-turbine-how-much-horse-power-789047/)

vr4much 09-25-08 07:46 PM


Originally Posted by liquidblackracing (Post 8585847)
haha 500 hahah try at least subtracting 200 sorry dude

so i guess when HKS rated this at 550 hp they mean max cc injectors/fuel pump etc??

RacerXtreme7 09-25-08 08:15 PM

And thats a pic of a 3rd gen.

vr4much 09-25-08 08:40 PM

fg
 

Originally Posted by RacerXtreme7 (Post 8586460)
And thats a pic of a 3rd gen.

well this is 1992, the second gen rx7's link is up to 1992
lol 2nd gen says 1986-1992 third get in 1993 +

xeccentric 09-25-08 08:44 PM


Originally Posted by vr4much (Post 8586519)
well this is 1992, the second gen rx7's link is up to 1992
lol 2nd gen says 1986-1992 third get in 1993 +

i'ts most likely a 93. it was probably jsut built in late 92.

vr4much 09-25-08 09:05 PM


Originally Posted by xeccentric (Post 8586532)
i'ts most likely a 93. it was probably jsut built in late 92.

gah lol i should have said it was an fd.. eventhough fcs were produced up to 1991

RETed 09-25-08 10:39 PM

Since this is mostly a USA-specific board...

FC3S had a convertible model released as a 1992 model.
See Jack Yamaguchi book for more details.

Yes, the FD3S was released in Japan as a 1992 model.

This does cause some confusion.


-Ted

vr4much 09-25-08 10:43 PM

yea this is right hand drive, does a T04E give more power in a FD ?

RETed 09-26-08 12:42 AM


Originally Posted by vr4much (Post 8586853)
yea this is right hand drive, does a T04E give more power in a FD ?

No.


-Ted

Aaron Cake 09-26-08 03:55 PM

Thread cleaned, and moved to FD forum.

donz 09-26-08 05:44 PM

So you bought a JDM FD, that has been repainted and has a single turbo? Not to be harsh but I hope you had someone take compression numbers and actually look over the car. I was looking into a JDM one too, but some of the stuff that comes over is going to cost an arm an leg to fix, but with the right deal, I suppose you can over look that.
Where do you live because you will have to get a tune to account for the elevation difference. Have any more pics? i like the blue.

vr4much 09-26-08 07:00 PM


Originally Posted by donz (Post 8588845)
So you bought a JDM FD, that has been repainted and has a single turbo? Not to be harsh but I hope you had someone take compression numbers and actually look over the car. I was looking into a JDM one too, but some of the stuff that comes over is going to cost an arm an leg to fix, but with the right deal, I suppose you can over look that.
Where do you live because you will have to get a tune to account for the elevation difference. Have any more pics? i like the blue.

it has not been repaired, but changed color, the car was tuned by trial, they are very popular in japan so i trust them ( know to produce 500 hp rx7's), i've bought a few cars from japan and nothing really too big to fix exept the usual stuff to pass the OOP inspection to get it registered ( brakes/ sway bar link/ball joint tires sometimes ) normal cheap stuff for a 15 year old car. I really think there was things that my seller did not mention because he said aftermarket 550 injectors, but whats the point of that if there is a giant single turbine.. anyways i will have my mechanic see if there is a fuel pump/fuel management, I live in calgary heres more pics see if any controllers make give you hints


http://i108.photobucket.com/albums/n...08/rx7body.jpg

http://i108.photobucket.com/albums/n.../theinside.jpg

vr4much 09-26-08 08:16 PM

oh i just read that the f con pro is a fuel management :)

Mahjik 09-26-08 08:23 PM

https://www.rx7club.com/single-turbo-rx-7s-23/t04e-turbine-approx-hp-setup-789612/


All times are GMT -5. The time now is 06:21 AM.


© 2024 MH Sub I, LLC dba Internet Brands