who makes em and who makes roll bars? would like a bar that goes from one rear strut tower to the other or something of that nature
thanks

 

All FDs came from the factory with a rear shock tower brace.

 

There are some replacement bars:

http://corksport.com/store/category/...sion_misc.html

IMO, they aren't worth it unless you need to hook your harness to them.

 

Keep in mind that the factory rear strut tower brace is in no way an acceptable harness connection point or anything like a roll bar. So if you intend to set up a harness, you'll need a different beam there.

Dave

 

I would go so far to say that if you are running a harness for anything other than auto-x, I would install a rollbar, period.

 

thats what i want a roll bar put want it to stay behind my head near the ceiling im 6'6" so i dont want bars coming into the front of the car what about subframe connectors

 

http://www.kirkracing.com/

 

I would check the huge cage/rollbar thread in the racing sub-forum.

These cars arent' GM F-bodies, they don't need sub-frame connectors....