Street ported set-up safe?
Im installing a new street ported motor soon, and Im wondering if running the stock ECU is safe even if im running only like 9-10psi max.
btw my power mods will be: non-seq mod intake mod exhaust HKS DP efini y pipe if the stock ecu is NOT safe then what is the absolute cheapest possible way of making this set up safe/reliable? (I havent bought a electronic boost controller, so keep this in mind) I dont really want to have to buy a power FC for $900 (after shipping) then have to travel 1000kms to have a good shop tune it for another $400 thanks! Jeff |
might need to get a boost controller..i just ordered one cause i was in need. all i have done is intakes and dp. the boost spikes on cold nights
|
Theres no point installing a new street ported motor if your not going to have it tuned. and also...in answer to your question.
NO Get yourself a PFC or dont get it rebuilt, because it just wont work... |
Im not getting my engine rebuilt.. im paying less for a rebuilt engine WITH 3mm seals and a street port and no core needed then I would for a standard rebuild... so theres no way to do it?
even a plug and play? |
Originally Posted by 4CN A1R
(Post 7601228)
might need to get a boost controller..i just ordered one cause i was in need. all i have done is intakes and dp. the boost spikes on cold nights
ohh well im going for power now :D |
Nop sorry to say but theres no way you can run the above setup on the stock ECU...
|
All times are GMT -5. The time now is 10:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands