So... I took off my stock lip
 

to get the 99spec lip ready to be put on, however I got lazy and after taking off the stock lip I took a nap. Anyways, right now my car is lipless, will the belly pan fall off w/o the front screws in that were holding the lip inplace?

No, the belly pan is held on by more than the lip, there are bolts on each side (2/3) and 2 POS plastic interior trim screw/rivets at the back.

But don't drive it. At least put one screw in the center/front so the air doesn't rip it down under the car.

shit is that what i saw fly off in my rearview? i saw some plastic shatter, was prolly my car but was only a small piece.. i think, UNLESS THE WHOLE THING IS OFF NOW I HAVNT LOOKED YET!

are you serious???? you saw shit flying off your car and didnt stop.

i was hearing some nasty rubbing sound, wasnt sure what it was, started to pull over on the freeway when i start black plastic fly off, i figure it was something to do with me removing the stock lip. anyways i just looked and the belly pan is still there, but the cover next to the belly pan on the driver side is ripped in half, that's what flew off.. its dangling now! Anyone got a spare they want to sell me? =o)

$95 for mazda for replacement, Im on my Third

First pervious owner did god know what to it
Second, hit a rock, Cracked in half
Third, Good right now!


the stock one and the 99 Spec ones are different right, if so then i will have one to see soon

usually its a good idea to stop the car and check it if you hear interesting sounds while driving.....wouldnt want something to get caught up under there and cause you to wreck now would you?

whered you get it? malloy? im needing one.

Yeah, but that only makes sense if you are intelligent. Unintelligent people just keep driving. The tragedy is that they can't be statutory limited to driving Pintos.

Stop complaining and off your lazy ass. Put the thing back together, its not that hard.

does the $95 replace the belly pan and the covers on the side? or just the middle piece?

what are you doing with your stock lip?

Are you talking about the brake ducts? They are the pieces which are directly in front of each wheel. Those are separate, maybe $65 each. They also bolt in under the lip on each side.

I suggest next time you remove the lip or work with it, lift the front of the car and take a good look at what you're doing so you can see if everything is nice and secure.

took it off to put on 99spec lip.. yea and I was working in the dark, lazy, didnt want to jack the car up, taking screws off blindly, by the time i got the damn thing off I didn't want to bother messin with the 99lip =o)) ahhh yes laziness rules

you are going to have to do about 2 hours work to get the 99 lip on the 93 bumper. it requires measurement and drilling of new holes into the lip to make it line up nice.

Pics of your stock lip? Wanna sell?

-Joseph

wow didnt know the stock lip was in any demand what so ever, sure when I get the 99 on its yours

thats what i was asking... but whatever :/

I don't get why anyone would want this plain looking lip - the R1/R2 and '99 lips look MUCH better! Anyway, I would have given you mine for free if I didn't already throw it away!

HAHAHAHAAHHAHAH

Look what I just got, "Sorry! The administrator has specified that users can only post one message every 30 seconds."

That's a new one. :)

-Joseph

.