Simplified-Sequential Twin Turbo Setup with pettit ecu
Simplified-Sequential Twin Turbo Setup with pettit ecu
so the question is will this work or will it go in to limp mode ? |
It will work.
|
It will work, but you need to put resistors on the plugs that are not connect so you don't get CEL
|
Originally Posted by hondasr4kids
(Post 10597379)
It will work, but you need to put resistors on the plugs that are not connect so you don't get CEL
|
330ohm resistor 1/2 watts
You don't need them on the solenoids which are used for emissions only. Those will throw a code, but they do not put the car into limp mode. |
All times are GMT -5. The time now is 03:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands