Show of hands: Who else has a non-running FD?
Okay, so my car has been non-running for something like....one year three months 23 days 9 hours....or so. ;)
EVERY fucking day I walk by it sitting in the garage....up on jack stands....the engine sitting out on the work bench, forlorn. There have been so many times I had the bucks to send it off and get it rebuilt, only to have the funds vanish for one reason or another. Now....one part of me says, "Chill out....the main thing is you have the car, there really is no hurry to get it running...be cool.", while the other side is like, "DAMMIT! I am TIRED of not being able to drive you!!!" I try to rationalize things like, "Well...look at it this way: I'm not putting miles on it...." or "just THINK of the number of tickets I have probably avoided...." and so on so forth. Couple all this with the fact that I am basically an impatient person. This....is teaching me humility and patience and a host of other things I don't normally deal with real well. I am reminded by two of my friends that say I have experienced nothing yet, one guy had a '69 'Vette that he did a complete frame-off restoration, it was out of commission for over 4 years, another friend had a '64 XKE that cracked a head in 1972 and he didn't get it fixed until 2000. EIGHTEEN YEARS! I guess my lot isn't so rough compared to that....sigh. http://home.earthlink.net/~bajaman123/spring05.jpg So anyway, who else is waiting to get their car going? |
:wave:
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/when-engines-break-pics-411874/ A nice heftly tax bill has slowed down my progress. |
Mine was out for a good 6 months while I was rebuilding it. I got a thread in the forum somewhere about the rebuild. Anyway, got it running great. Put on about 1500 miles, and then spun my front main bearing. Very frustrating. I finally got most of the replacement parts for that, and I'll be putting the engine back together this weekend. It'll still be another few weeks until I get it back in the car though (and then another few weeks while I break the new bearings in). Oh well, such is life.
If it makes you feel any better, I have a 1971 'Cuda sitting in my garage. It needs a complete frame-off. Currently, the motor is on a stand next to the frame, and the body is in my dads garage waiting for me to get around to working on it. It's been sitting in that condition for over a year. At the current rate I'm going, I estimate another 36years... ;) Maybe it can be my retirement project. -Rob BTW - I can't believe you actually have a F&TF poster hanging up on your wall... that's just sad |
Mine's been apart since November. It ran for roughly a year with the LS1 in it before I decided to "upgrade". I've had trouble settling on a setup I like (being fickle sucks), so I've suffered delay after delay.
I thought engine conversions were supposed to eliminate the downtime. :scratch: |
Originally Posted by Mahjik
:wave:
https://www.rx7club.com/showthread.php?t=411874 A nice heftly tax bill has slowed down my progress. |
Originally Posted by saxyman990
BTW - I can't believe you actually have a F&TF poster hanging up on your wall... that's just sad |
My Blk FD's been down since Aug of last year... And I got my ported rebuilt sitting right behind it for past 5 months.. I'm just lazy and busy at work... Also, I want to do it right with right stuff..
|
Mine runs....but I can't start it as I'm waiting for the polished airpump friendly pipe and Greddy elbow to come back....
|
Mines been down for ohhhhhh, 17 months lol. I just got kinda burned out and too busy with work and family to mess with it. I started messing with it again in the past few months. Shooting for 500rw on pump gas.
Stephen |
Originally Posted by saxyman990
Put on about 1500 miles, and then spun my front main bearing.
|
Mine has been out since for about 13 months. I am in school in Oklahoma so I can't do nothin about it now, and I need to save up to fix it. Trying to decide if I should try and do the rebuid myself or take it to Pineapple. I have had the car since January 2003 and have had about, oh I don't know, 9 months due to an engine fire a week and a half after purchase. This car is the epitemy of a love/hate relationship.
|
Mine's been out of service for approx. 18 mos. That sad part is that nothing's really wrong with other than a clutch that's slipping. We had a baby that I took to daycare in the mornings and a baby seat just wouldn't fit! Now it's been sitting in the garage and I need to drain the gas and replace before I do anything.
|
Originally Posted by bajaman
I remember that thread, I thought it coincidental that you mentioned the SwainTech ceramic coating. There was an article in the new EUROPEAN CAR magazine about this...pretty cool. YOUR project is coming along nicely....looks really good. :bigthumb:
I was hoping to be done before this May, but it just didn't happen. Unfortunately, that means I'll miss most of the track season this year. I'm hoping everything will be back together, sorted, and broken in by fall so I can hit the last few events. |
Yeah mine is a seemingly minor problem as well (burns a crap load of oil), but I have no idea whats wrong other then my oil seals being shot and therefore requiring a rebuild.
|
HOW MANY FBs, FCs, and FDs???
Originally Posted by herblenny
My Blk FD's been down since Aug of last year... And I got my ported rebuilt sitting right behind it for past 5 months.. I'm just lazy and busy at work... Also, I want to do it right with right stuff..
|
Mine's been out of serice for 8 months, and it would be done, but I'm waiting on the R85 to come in so I can have some real fun when it gets back together.
X... |
I'm still down ... tranny swap had me down in November... had the car up in January and right back down that same day for a blown apex seal. (Damn fuel filter)... the clock is still running on the rebuild... no idea when I'll finally be out of my Nissan's and back in my beloved Mazda.
http://img.photobucket.com/albums/v2...rotoday008.jpg http://img.photobucket.com/albums/v2...rotoday004.jpg ~Kris |
I'm putting mine down due to a 62-1 transplant.
Does that count? Back to the olde TII and the wonderful HT-18 turbo. |
Mine's been down for almost 2 months. Went to replace the thermostat, broke some bolts, drilled them out except for one which broke off inside. Had to get a complete t-stat housing and replace. Replacing some hoses and sensors while everything is out. Currently putting it all back together.
|
Originally Posted by dubulup
did you find the cause of failure?
I thought I'd be slick and use a larger diameter O-ring instead than the normal O-ring w/ white teflon spacer. Apparently, that didn't work. I lost oil pressure at apprx 5k RPM, and a couple pounds of boost. When I tore the engine down, I found that the O-ring squeezed out under pressure. Ooops. Oh well, it was completely my fault, and I'm not trying to say other wise. Fortunately, I wasn't really pushing the engine that hard, or there would have been significant damage. As it was, I replaced both main bearings (the front was utterly destroyed, and the back had some scrapes). 12 new side seals, 6 new apex seals. I probably could have reused some of these, but I'd rather do it the "right" way. I also replaced the e-shaft, and most of the small stuff on the front of the e-shaft (thrust bearings, thrust plates, washers, spacer, etc). Oh yeah, and I also replaced the O-ring and teflon spacer. I believe the total price of my "mistake" came to about $600. Not too bad, but enough of a slap in the face to learn my lesson. -Rob |
Sign me up :D
|
Some jerk ran a stop sign so I need my frame straightened.
http://www.nopro.com/~fdparts/albums...5040.sized.jpg |
Mines been down for a coupla months now. Just got the new engine this week, but still waiting for the turbos.
Oh and from 1972 to 2000 is more like 28 years. :) |
Mines been down for about 8 months. Ive been trying to finish up a rebuild and im right there im just having stupid little problems like relays and wiring issues. I want to get the dam thing running so bad but school keeps me so occupied..
http://i3.photobucket.com/albums/y10...N1793small.jpg |
Originally Posted by bencb44
Mines been down for a coupla months now. Just got the new engine this week, but still waiting for the turbos.
Oh and from 1972 to 2000 is more like 28 years. :) |
It started as replacing the pillowball bushings and now.....
http://swampanime.dyndns.org/flunkys..._Rear_body.jpg It sure made it easy to replace the fuel filter.... In the next few weeks, I should be finished cleaning, repainting the subframe & diff and putting it back together. |
mines down. keep buying more parts instead of finishing what I have. Also fixing up my shop.Hey I have a 1966 Chevelle that isnt done and I started on it in 1982 or so. It was supposed to be a two year project.
eric |
Wonder whats in the group buy section?
|
broken ppf and diff studs to hold up ppf
|
:confused: [QUOTE=bajaman]Okay, so my car has been non-running for something like....one year three months 23 days 9 hours....or so. ;)
EVERY fucking day I walk by it sitting in the garage....up on jack stands....the engine sitting out on the work bench, forlorn. There have been so many times I had the bucks to send it off and get it rebuilt, only to have the funds vanish for one reason or another. Now....one part of me says, "Chill out....the main thing is you have the car, there really is no hurry to get it running...be cool.", while the other side is like, "DAMMIT! I am TIRED of not being able to drive you!!!" I try to rationalize things like, "Well...look at it this way: I'm not putting miles on it...." or "just THINK of the number of tickets I have probably avoided...." and so on so forth. Couple all this with the fact that I am basically an impatient person. This....is teaching me humility and patience and a host of other things I don't normally deal with real well. I am reminded by two of my friends that say I have experienced nothing yet, one guy had a '69 'Vette that he did a complete frame-off restoration, it was out of commission for over 4 years, another friend had a '64 XKE that cracked a head in 1972 and he didn't get it fixed until 2000. EIGHTEEN YEARS! I guess my lot isn't so rough compared to that....sigh.[QUOTE=bajaman] I'm no mathmatician but '72-'00 is 28 years, and thats a little rediculious for a head. Anyway, mine is non-running, I unplugged the ecu....... |
I Feel Better Now
3 WEEKS. GOT IT GOING THIS EVENING, BUT STILL WON'T START WITHOUT ETHER. I AM THINK ABOUT PUTTING IN AN ETHER BOTTLE INSTEAD OF A NOS TO HELP START THE CAR. HEY THERE IS AN IDEA. ALL THE TROUBLE FOR A CAR. WHAT WERE WE THINKING.
:bigthumb: |
I Do I Do Hope To Be Done This Summer
|
ow and going on 3 year's only drove it 6 times
|
Been done for a whole three weeks. :) Most likely will be down 2-3 more. Small potatoes in this thread.
|
I'm pretty sure I have the all-time record: May 15th, 1998.
That's 2,542 days, 7 hours, 51 minutes and 2 seconds... 3 seconds... 4 seconds... :p: |
Yeah Jim but you're doing it deliberatly :-D LOL
|
Originally Posted by jimlab
I'm pretty sure I have the all-time record: May 15th, 1998.
That's 2,542 days, 7 hours, 51 minutes and 2 seconds... 3 seconds... 4 seconds... :p: Shit man....I'd kill for the bucks you've spent on that thing! |
Originally Posted by travisorus rex
Sign me up :D
Heh, me too! baja: all of the things you said are so very true. These torn feelings are making my head spin... and its only been a month and a half. |
Originally Posted by bajaman
Yeah, and you do wild and crazy and VERY expensive stuff to yours (like painting the car with CHROMALLUSION paint!)
|
Originally Posted by jimlab
Don't forget painting over the Chromalusion paint... :p:
|
3 Attachment(s)
Originally Posted by JeffShoots
Well it did make a NICE base coat :bigthumb:
https://www.rx7club.com/attachment.p...d=110042&stc=1 https://www.rx7club.com/attachment.p...d=110043&stc=1 https://www.rx7club.com/attachment.p...d=110044&stc=1 |
Thats a pretty blue Jim, I like that a lot better than the Chromalusion.
|
been 2 1/2 months and will prob be anohter 4 or so... :(
|
Mine has been down since x-mas because most of my parts are on the backorder from hell list!!!!!
|
Actually the gas prices make me feel better about the down time.
|
Originally Posted by lopedl
Actually the gas prices make me feel better about the down time.
|
only one week for me... but it will be about 5 or 6 more. I miss it already :(. I don't know how you guys can wait for years.
|
RX-7 s are a CULT vehicle , not to practicle but a lot of conversation and fun , probably more FDs not running than FBs, turbo cars dont like sustained high speed on interstates for long periodes, I mean hi-speeds. like 15 lbs for 1/2 hr. OH yes I do own one, yes I do call it some fancy names .
|
I could get it running if i finished the battery relocation. But that won't happen now that I'm going to do a 20b swap. I am aiming for having it road worthy by next summer.
That's pretty good considering my Roadrunner took 8 years, still needs rims/tires the headliner installed and the tail lights rewired. |
at least everyone has gotten to drive there car. i bought mine in may of last year. got it home and started tearing it apart to paint it. and since i don't have heat in the garage, the dust got kinda deep on it. i heard it run before i bought it tho. but not for long since it had a hole in the radiator.
|
All times are GMT -5. The time now is 09:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands