Searching for a picture of an FD water pump....
Like it says i'd like to see a picture of the water pump(outside of the car) and the housing too if possible. Preferably with the pulley on.
|
No one has a picture?
|
|
dupe
|
Thats pretty good. Do they have any other pics of that? I'd like to see the pump aswell and the housing flipped so its facing forward.
Thanks for the help though, most of the pics i found here were on the car and behind a bunch of junk! |
Never mind I found another
http://www.rotorsportsracing.com/ima...ythermocov.jpg and another http://www.rotorsportsracing.com/ima...erpumpbody.jpg |
If anyone has some shots of the wp up close or the whole assembly without obstructions infront of them i would really be helped out, thanks!
|
Originally Posted by 1987RX7guy
If anyone has some shots of the wp up close or the whole assembly without obstructions infront of them i would really be helped out, thanks!
-Alex |
Sure all pictures will help me.
I am doing a conversion on an FC to serpentine belts and i need to see what kind of space requirements i will need to have and what kind of hoses I will need. |
TT_Rex_7, if you could get a picture of the bolts that hold on the t-stat housing that would rock. I'm trying to see if the bolt parterns match the FC front cover/iron.
|
2 Attachment(s)
Here's a couple of pics for you! Hope that helps you out.
|
93,
That's awesome! Those are good, definately helps me out. I have some questions about some bolt/stud holes i'll ask in a few minutes after I mark the pics. |
1 Attachment(s)
Hey the numbered spots i need to find out what they are for.
https://www.rx7club.com/attachment.p...d=106148&stc=1 |
Holes 1 and 2 bolt on the air pump. The 2 holes you have marked as 3 helps bolt on the crossover pipe. Hole 4, I don't remember. :)
-Alex |
Cool if anyone knows what #4 is for i'd appreciate it.
|
#4 isn't a bolt hole. It's a nipple for the rat's nest coolant return line.
|
Maybe this will help as well?
http://www.nopistons.org/albums/fd_p...0122.sized.jpg |
Yes! definately helping!
I can see the nipple better from this angel... |
Originally Posted by JONSKI
#4 isn't a bolt hole. It's a nipple for the rat's nest coolant return line.
|
1 Attachment(s)
Originally Posted by 93silverbullet
Yep! That's the one!
|
93,
Does that line lead to the nipple on the rear of the block? |
Originally Posted by 1987RX7guy
93,
Does that line lead to the nipple on the rear of the block? |
1 Attachment(s)
Here's another pic that shows where the line ends up (in red). I don't recall if it goes to the bottom of the TB or not. The FSM should show exactly where it goes :).
|
Originally Posted by 93silverbullet
Here's another pic that shows where the line ends up (in red). I don't recall if it goes to the bottom of the TB or not. The FSM should show exactly where it goes :).
|
All times are GMT -5. The time now is 11:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands