RX7store hard pipes fit on stock airbox? Yes! (pics)
 

With all the talk about the cheapo Bomez pipes not fitting, I can unequivocally say that Jason's pipes fit. While waiting for the Apexi intakes to come in on this rainy day, I was curious if the stock airbox would fit with the pipes. Considering Cali smog cert(including visual inspection) is coming up it was good to know. I've never seen pics of them with the stock airbox on the forum yet either so here you go:

http://www.strages.homestead.com/files/pipe0.jpg

http://www.strages.homestead.com/files/pipe2.jpg

http://www.strages.homestead.com/files/pipe3.jpg

http://www.strages.homestead.com/files/pipe4.jpg

those are the bomez hardpipes off of ebay?

edit: never mind ;)

Jason's pipes from the store. Pricier, but worth it. No major muscling/coupler-twisting required. Haven't road-tested for a likely boost increase with all the rain yet, but they sure make the turbos sing, even thru the stock POS airbox.

*Edit* Ya know, if the stock airbox was prettier like the M2 and someone offered hard BOV/CRV/air pump pipes, it wouldn't look half bad. :)

will those nice polished pipes fit the Apex'i intake system?

Yes. They are the same length as the rubber accordion ones. You can always adjust the pipes to adjust for hood clearance, etc. Tomorrow the Apexi's come in and I'll post an installed pic. Just wanted to put to rest any concerns that Jason's pipes won't fit the stock airbox. Next stop, GReddy 2 or 3-row, pipes and elbow. ;)


P.S. And no I'm not going single yet until I torch the twins and/or motor. :D

How much were those shipped?

sweet, thanks toad man :) have fun!

List for $229 shipped. He may discount a bit if you're a regular customer. ;)

Nice..... Are you planning to polish the intake manifold to match the bling?

When I get the Y-pipe, elbow and pipings, preferably with the GReddy 2-row. Anyone have a solution for this relay bracket, maybe polished?

http://www.strages.homestead.com/files/pipe5.jpg

Sorry, but the Greddy FMIC will not work with those bling bling intake pipes.:p:

what the hell is that? ive never noticed or seen that beofre

You mean with the stock airbox obviously, right? That is expected.

One word for you: Moooohhh. Not sure if you heard what it sounded like on my car :) Putting on a midpipe and removing the airpump solves that problem though. I am willing to bet their is a chance you could fit the hardpipes with intake filters with a greddy 2 Row FMIC as I made it fit without bending the stock accordion pipes (Had to remove air pump though). Or you could just have custom piping welded to make it work too.

i bought the el cheapo $30 pipes off ebay. snook was polishing them for me. we'll see how that fits when it gets here.

you gots to hide the screw side on those wormclamps, man. Take off the UIM and wirebrush the hell out of it and the TB for some el cheapo bling.

blueskater, are you talking about the BMZ ones? i just looked on ebay and found some chromed aluminum intake pipes... anyone know if these are decent at all?

I have them on my car... looks just like toadman hard pipes..

Fit perfect with my HKS intake plus bling look.

You should've taken a photo of the primary turbo hose setup as well. That's the one that gives everyone trouble....

I polished mine, it was somewhat of a pain because of the niche's and crannie's. Just get the thing powdercoated "almost chrome" or whatever color they have. It will look muuuuuchhhhh better and that tiny thing....pshhhhh - cheap!

that thing does look bad against the red background. You should just sand it and paint it gloss black

i painted mine black, looks 10x better and only took a few minutes.

no i think the bomz usually went for like $40-50

it was this http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEBWN%3AIT

snook said apparently its very thin metal and had some kind of clear coat on the outside that he had to grind through....?

Nice snaps my friend, nice snaps ;)

thats one clean FD!