RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   rx7 vs 300zx 0-1 (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/rx7-vs-300zx-0-1-a-177745/)

des3rtfox 04-18-03 10:58 AM

rx7 vs 300zx 0-1
 
i need more nwaaas :D
how much torque can i get if go non-seq ?

i have a 93 mod touring.
i only got 3,5" from turbo
the rest is stock.

i guess the 300zx have about 300 hk, and i 270hk....

he also have 100 more nm....

and i have a big problem...i dont know what it is, but i feels like fuelcut, but my boost is on 0.6
the stock pump should handel this.

this between 4500-6000 rpm in 3-5 gear.
can it be the plugs? plugcable?
i have a electric boostgauge and the Y-pipe with the vacumhose is on the same hose that goes to the mapsensor...is near to the mapsensor.
can that be the problem?

anyone? must kill that 300zx...but short on $$$

SPOautos 04-18-03 02:52 PM

Actually .6 is below stock boost, sounds like you have some vac line issues or your gauge is wrong.

As for the other problem, could be a lot of stuff, I'd start by fixing your boost issue then change your plugs and change your fuel filter.

STEPHEN

neoamd 04-18-03 03:43 PM

Re: rx7 vs 300zx 0-1
 

Originally posted by des3rtfox

i only got 3,5" from turbo
the rest is stock.

Fix your boost problem. Go non-seq and get silicone vaccuum lines and that should fix it. Make sure your intercooler pipes are ripped etc.

Also you need to get a ECU. If you have a 3.5 inch exaust from the turbo back you might be leaning out and its cutting the fuel. Watch it, your on motor blowing land here.

For a ECU I would just get a pettit or M2 unit. You should be fine with that. Unless you plan on going big someday and then i would go with a Haltech or PFC unit.

Josh

des3rtfox 04-18-03 07:38 PM

well...i get 0.9 on the first turbo, then i peek up to like 1.3 right before it change...and then down to 0.6

but the ''fuelcut'' come around 0.6
i dont need to have a lot of boost before the cut come..

4 gear...ca 6000 rpm.....then ''baaaarrrp''in a secound and then it runs normal again...but i lose power when it burp...

blue flame and smoke come out of the exaust when this happen
:eek:

Ashitaka 04-19-03 01:41 AM

blue flame? you're burning oil... watch your motor...

des3rtfox 04-20-03 10:00 AM

can the fuelfilter be the problem? or some of the problem?? :confused:

des3rtfox 04-23-03 05:14 PM

anyone? help...

AMRAAM4 04-23-03 05:33 PM

i think a few of the guru's here have provided you with the possible problems.

Blue flame/smoke....BAAAADDD. Cool it in your FD or accept it when it goes POOF.

des3rtfox 04-24-03 09:46 AM

my oil level seems to be okay...i dont need to refill any....its clear and nice....fresh..

but the ''fuelcut''....any idè?


All times are GMT -5. The time now is 11:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands