RaceShop Weld In Roll Bar (lots of pics)
here are some pictures of a weld in bar i just finished up.
Options include: rear diagonal mini main diagonal seat back bar door bars with swing outs light weight strut brace more details to come http://raceshoppro.com/roll/01.jpg http://raceshoppro.com/roll/02.jpg http://raceshoppro.com/roll/03.jpg http://raceshoppro.com/roll/04.jpg http://raceshoppro.com/roll/05.jpg http://raceshoppro.com/roll/06.jpg photos below shown with out diagonals for daily driving http://raceshoppro.com/roll/07.jpg http://raceshoppro.com/roll/08.jpg This shows the details of the double shear machined parts for the rear diagonal http://raceshoppro.com/roll/09.jpg |
One more
Here is one more photo of the mini main diagonal
http://raceshoppro.com/roll/10.jpg |
Looks awesome. What material was used? Also, is it possible to have the rear diagonal brace turned into a crossbrace for extra support?
|
Originally Posted by Chaosx1
Looks awesome. What material was used? Also, is it possible to have the rear diagonal brace turned into a crossbrace for extra support?
The Main hoop --- 1.750 X .095 chromoly Main diagonal --- 1.625 X .083 chromoly Door bars -------1.750 X .095 chromoly Rear diagonal----1.250 X .058 chromoly Cross brace/Strut brace is 1.500 X 1.500 X .065 |
are you selling these? price?
|
Larry that's awesome! Nice work!
Bobfish, you missed out on the group buy...check out the GB forum |
can i order one even if its not at the group buy price
|
probably...just pm larry (the guy in the first post)
you might want to scan the old GB to see the available options |
pm was sent to you larry
|
hey larry,
is your shop located in brentwood? how much for a street version? ~bee |
is it approved by any major sanctioning bodies yet?
|
Originally Posted by Larz
is it approved by any major sanctioning bodies yet?
|
looks good Larry...
|
Wow, from what i can see, you've built the best fitting bar i've seen... nice work.
|
hope this the same
|
Originally Posted by the-kid
almost. The GB was orginally for the "street version". Larry since expanded it to include all of the other options. The group buy was setup for the street bar and I let it get off track a little.I agreed to add the following options. Street bar with rear daigonal powdercoated -----------750.00 Seat back bar--------------------------------------------------135.00 Door bars-------------------------------------------------------75.00 Each |
Originally Posted by Mas280
Larz, If it does not rain this Wednesday I will take it to the 1/4 mile track. The roll cage should be just fine for NHRA events. I plan on taking the car out to Thunder Hill later in April.
Is that your car? I noticed the V8 ecu on the second pics. |
very clean
|
Originally Posted by audiobot7
Hey Mike,
Is that your car? I noticed the V8 ecu on the second pics. Yes it's Mikes car, I'm holding it hostage :) (almost a month now :MissileSm ) Sorry, I missed your question on the first page, The street version starts at 945.00 and has lots of options. There listed in the GB thread. Larry |
Originally Posted by audiobot7
Hey Mike,
Is that your car? I noticed the V8 ecu on the second pics. yes. Larry was giving me a hard time about the ecu. He did not want the ecu in the pictures. I will have to put the ecu and cover back on when I get my car back. |
Mas,
looks like you got a great bar and excellent install/customer service. I wished I lived in the bay area to have Larry do work for my car! However, even with the gb and dealing with parts all the way from Texas, his CS has been top notch! I was curious on how the door bars work??? Do this spring clip out? Just curious, I'm not interested in this for my car just amazed by the clean fitment and functionality :) |
WOW!!! That is one of the best looking cages I have ever seen. CLean!!! Great work!.
-josh |
Originally Posted by 7racer
Mas,
looks like you got a great bar and excellent install/customer service. I wished I lived in the bay area to have Larry do work for my car! However, even with the gb and dealing with parts all the way from Texas, his CS has been top notch! I was curious on how the door bars work??? Do this spring clip out? Just curious, I'm not interested in this for my car just amazed by the clean fitment and functionality :) I was very lucky to Have Larry do the installation. I know that he normally does not do install jobs. The door bars are spring loaded. You can also take out the door bars for street driving. I am sure Larry will post pics of the removal later. Mike |
Originally Posted by the-kid
Wow, from what i can see, you've built the best fitting bar i've seen... nice work.
Buy the way....I love the double shear machined parts, fiirst shop I seen use this set up, what a bad ass idea...WAY STRONGER! |
Originally Posted by Raceshop
Yes it's Mikes car, I'm holding it hostage :) (almost a month now :MissileSm )
Sorry, I missed your question on the first page, The street version starts at 945.00 and has lots of options. There listed in the GB thread. Larry |
All times are GMT -5. The time now is 01:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands