RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Quick ?? w/AEM C2DI (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/quick-w-aem-c2di-289239/)

TwinTriangles 03-31-04 12:20 PM

Quick ?? w/AEM C2DI
 
Well I got it all wired in but, how should I have the 3 switches set ?

XSTransAm 03-31-04 12:38 PM

rtfm?

edit: nm i cant even find there website let alone a manual. (not a fan of aem)

IronMdnX 03-31-04 12:58 PM

1 - on (enables multi strike)
2 - off (if wired after the ignighter)
3 - off (360deg firing)

HTH

TwinTriangles 03-31-04 01:38 PM

Ok thanks, I wired in at the short harness that connects directly to the coils so that would be after the igniter I guess, just making sure.
Thanks

TwinTriangles 04-07-04 10:03 PM

Ok thought Id follow up on the before & after of the AEM C2DI. Im for sure putting out noticeably more power in the higher rpms with it. Cleared up all of my ignition break up. I really like it but it seemed to have somehow lowered the streetability factor a notch, My idle isn't as solid with it, I get the rotary "blip" every little bit at idle and I didnt before. The throttle tip in is pretty extreme now not real smooth anymore and it doesnt like closed loop at low revs like say 30mph or so. When I watch the AFR gauge go back and forth in closed loop you can actually feel it, allot...
The install wasnt too bad, I was confused at first but once I figured it out it took me about 2 hours. Then another few days to decide where to mount it and make an aluminum bracket.
Over all I like it, its doing its job and would recommend it to others but I do think a tuning session is in order after installing one.

93BlackFD 04-07-04 11:45 PM

no, you leave them all off


multistrike is disabled if you switch #1 on

TwinTriangles 04-08-04 06:52 PM

Oh, hey thanks...!

TwinTriangles 04-08-04 07:01 PM

Wow, that cleared everything up! Thanks, this thing is great! I should learn to read directions more often...!

93BlackFD 04-08-04 07:41 PM

no problem, anytime :)

IronMdnX 04-08-04 09:46 PM

I didn't even catch that. sorry,

red 7 05-24-04 11:17 PM

i got all 3 off

TwinTriangles 05-25-04 03:26 AM

The AEM C2DI is an excellent buy after I figured out how to wire it in... Basically how the whole story sums up. I would recommend it to anyone.

jspecracer7 05-25-04 03:54 AM

Sweet...Mine goes in this weekend...just as soon as red 7 send me pics!

sk8world 06-08-04 12:50 AM

Pics of install would be great! Need to install mine soon..

jspecracer7 06-08-04 04:12 AM

Not hard to install at all...mounting is all where the user wants it really. I put mine against the fenderwall. All 3 of my switches are on the off position also...big time difference in power too:D


All times are GMT -5. The time now is 07:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands