RX7Club.com - Mazda RX7 Forum - Quick Time bellhousing?

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - Quick Time bellhousing? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/quick-time-bellhousing-1120770/)

Brekyrself

11-12-17 06:27 PM

Quick Time bellhousing?

In a never ending chase of perfection building this FD, safety is also a concern. Quick Time makes a bellhousing for the 13b -> t2 trans, anyone know off hand if this also works with an FD trans?

https://www.holley.com/products/driv.../parts/RM-4015

DaleClark

11-12-17 07:58 PM

The TurboII and FD both use the Type R transmission. It's VERY possible it would work but I'm not positive.

And DEAR LORD that thing is EXPENSIVE!

Dale

Banzai-Racing

11-14-17 06:44 AM

It would bolt to the engine. The TII uses a push clutch and the FD is pull, so the hydraulics are completely different. They also do not use the same starter.

Copeland

11-14-17 12:27 PM

Goopy makes a scattershield that fits on/over the stock FD bellhousing. It's a bit clunky but it does work. It's made from 1/4 steel plate IIRC.

Skeese

11-15-17 01:01 PM

Quote:

Originally Posted by Copeland (Post 12231926)

Goopy makes a scattershield that fits on/over the stock FD bellhousing. It's a bit clunky but it does work. It's made from 1/4 steel plate IIRC.

Last email I had with them last year they were $499ish, but still available.

All times are GMT -5. The time now is 01:36 AM.